Onsrud
Onsrud 62-775 Solid Router Bit .25 in Carbide
Solid carbide router bit with downcut spiral for clean cuts in soft plastic
- TypeHole, Drill, Bore & Wire Gauges
- MaterialCarbide
- Carbide construction resists wear for longer tool life
- Solid router bit design ensures precise cuts in soft plastics
- 1/4 inch cutter diameter suits detailed routing work
- Spiral O-flute downcut geometry clears chips efficiently
- New condition guarantees full factory performance from first use
Solid Router Bit for Soft Plastic
The Onsrud 62-775 is a solid carbide router bit with a .25 in cutter diameter. It uses a Spiral O-Flute Downcut design intended for soft plastic applications. The tool is supplied new and carries a California Proposition 65 notice regarding reproductive harm chemicals.
Check Tool Holder and Material Compatibility
Verify that your router or CNC machine accepts a .25 in shank before ordering. The downcut geometry pushes chips downward, so confirm this suits your workpiece hold-down method. This bit is specified for soft plastic; other materials may require different flute geometry.
Carbide Construction and Downcut Behaviour
Solid carbide provides high wear resistance for extended tool life in abrasive plastics. The O-Flute design aids chip evacuation while the downcut action helps hold thin sheets flat during routing. Expect a clean top edge on the workpiece with this configuration.
Highlights
- Carbide construction resists wear for longer tool life
- Solid router bit design ensures precise cuts in soft plastics
- 1/4 inch cutter diameter suits detailed routing work
- Spiral O-flute downcut geometry clears chips efficiently
- New condition guarantees full factory performance from first use
Specifications
| Brand | Onsrud |
|---|---|
| Model | 62-775 |
| Type | Hole, Drill, Bore & Wire Gauges |
| Material | Carbide |
Questions about this item
Does the Onsrud 62-775 solid carbide router bit come with any collets, bearings or wrenches, or is it just the bit alone?
The box contains only the single 0.25 in carbide router bit; collets, bearings and wrenches are sold separately.
The supplier title lists model 62-775 — is that the only size or are there other diameters in the same series?
Model 62-775 refers specifically to the 1/4 in cutter diameter; other diameters carry different model numbers.
What does the 1/4 in cutter diameter mean for feed rates when routing soft plastic on a CNC router?
The 1/4 in O-flute downcut geometry is designed for clean cuts in soft plastic; feed rates should follow the tool manufacturer's chipload charts for that diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
