We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 40mm square fan 10mm thick three-pin connector

OEM Industries

OEM Industries MGT4012LR-A10 40mm CPU cooler

SKU CH-7S5Y-A3HDP MPN MGT4012LR-A10

40 mm ball-bearing fan with 3-pin connector runs at 12 V and 0.08 A for compact CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 40 mm fan fits compact builds like Gateway SX2110G
  • Ball bearing motor runs quietly at 12 V 0.08 A
  • 10 mm slim profile clears tight CPU clearances
  • Three-pin connector enables motherboard speed control
  • No LED keeps interior lighting simple

40 mm Fan for Gateway SX Desktops

The OEM Industries MGT4012LR-A10 is a 40 mm ball-bearing fan designed as a direct replacement for Gateway SX2110G, SX2110 and SX2185 systems. It runs on 12 V at 0.08 A and connects via a standard three-pin header. The black plastic frame measures 40 by 40 by 10 mm and has no LED lighting.

Who This Suits

This cooler fits owners of the listed Gateway models who need a quiet, low-profile fan to keep a small-form-factor CPU within thermal limits. It is not for builders who need a larger heatsink assembly, higher airflow, PWM speed control or RGB illumination.

3-Pin 12 V Power Connector

The fan draws 0.08 A from a three-pin 12 V header, so the motherboard must supply that exact voltage and connector type. Verify the header pin-out and clearance before purchase.

Highlights

  • 40 mm fan fits compact builds like Gateway SX2110G
  • Ball bearing motor runs quietly at 12 V 0.08 A
  • 10 mm slim profile clears tight CPU clearances
  • Three-pin connector enables motherboard speed control
  • No LED keeps interior lighting simple

Specifications

ModelMGT4012LR-A10
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Questions about this item

Does my motherboard need a 3-pin fan header to run this 40mm cooler?

Yes, the cooler uses a 3-pin power connector that plugs directly into a standard motherboard fan header.

Will this 10mm thick fan fit inside my Gateway SX2110 or SX2185 chassis?

The 40x40x10mm dimensions match the original cooler used in those Gateway small-form-factor systems.

How can I confirm the ball-bearing fan is spinning correctly after installation?

Connect the 3-pin header, power on the system, and verify the fan rotates smoothly; the 12V 0.08A rating means it draws minimal current.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.