We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square 80mm cooling fan with orange LED and two wires

OEM Industries

OEM Industries JF0825S1M 80mm 12V 0.15A 2-wire CPU cooler

SKU CH-XXH9-51EAM

An 80 mm sleeve-bearing fan with orange LED runs on 12 V at 0.15 A via a two-wire connector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Wires
  • LEDOrange
  • Efficient 12V cooling with low 0.15A draw
  • Compact 80mm square frame fits tight chassis spaces
  • Sleeve bearing runs quietly at reduced friction
  • Two-wire power connector simplifies motherboard installation
  • Orange LED adds subtle visual status indication

Compact 80 mm CPU fan for tight builds

This 80 mm square fan fits standard 8025 mounting holes and draws 0.15 A at 12 V. It is designed as a direct replacement cooler for small-form-factor systems or legacy sockets where larger towers cannot be installed.

Sleeve bearing and two-wire power lead

The sleeve bearing keeps running noise low at typical speeds while the two-wire connector supplies power without PWM control. Orange LED illumination adds a subtle glow visible through vented side panels.

Replaces worn 80 mm coolers in older chassis

Swapping out a rattling or failed 80 mm unit restores adequate airflow for low-TDP processors. The jump is worthwhile when the existing cooler has seized or when the original heatsink is retained and only the fan needs renewal.

Highlights

  • Efficient 12V cooling with low 0.15A draw
  • Compact 80mm square frame fits tight chassis spaces
  • Sleeve bearing runs quietly at reduced friction
  • Two-wire power connector simplifies motherboard installation
  • Orange LED adds subtle visual status indication

Specifications

ModelJF0825S1M
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeSleeve Bearing
Power Connector2 Wires
LEDOrange

Questions about this item

Does the 2-wire 12 V 0.15 A fan support PWM speed control?

The JF0825S1M uses a 2-wire connector supplying 12 V at 0.15 A, so it runs at fixed speed and cannot accept a PWM signal.

Will the 80 mm square frame with 25 mm thickness fit my existing 80 mm mounting holes?

Yes, the fan measures 80 mm by 80 mm with a 25 mm depth, matching the standard 80 mm square mounting pattern.

How do I connect the bare 2-wire leads to a motherboard 3-pin or 4-pin header?

Match the red lead to the 12 V pin and the black lead to ground; leave the tachometer pin empty, then secure the connector so it cannot shift onto adjacent pins.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.