We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black square 50mm fan with three wires

OEM Industries

OEM Industries D05X-12TSP 50mm Fan CPU Cooler

SKU CH-K7BD-XXVJ4

50 mm Nidec fan with 12 V 0.12 A three-wire power for compact CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • LEDNo
  • NIDEC motor ensures reliable long-life operation
  • 50 mm frame fits tight small-form-factor builds
  • 12 V 0.12 A draws minimal power from the header
  • Three-wire connection allows motherboard speed monitoring
  • 5010 series design balances airflow and quiet running

Compact 50 mm Fan Cooler

The OEM Industries D05X-12TSP is a 50 mm square fan unit built around a NIDEC 5010 motor. It runs on 12 V at 0.12 A and connects through a standard three-wire lead. The assembly is sold as a fan only, without a heatsink or LED lighting, and arrives in new condition.

Suits tight enclosures and replacement jobs

This cooler fits small-form-factor cases and legacy boards that have a 50 mm mounting pattern. It will not serve builds that require a larger fan frame or a finned heatsink for higher thermal loads. Buyers needing PWM speed control should note the three-wire interface provides only voltage regulation.

Three-wire 12 V 0.12 A power spec

The 12 V 0.12 A rating and three-wire connector decide whether the cooler matches the header on your board. Confirm the header supplies 12 V and that the mounting holes align with a 50 mm square footprint before ordering.

Highlights

  • NIDEC motor ensures reliable long-life operation
  • 50 mm frame fits tight small-form-factor builds
  • 12 V 0.12 A draws minimal power from the header
  • Three-wire connection allows motherboard speed monitoring
  • 5010 series design balances airflow and quiet running

Specifications

ModelD05X-12TSP
ColorBlack
TypeFan only
Fan Size50mm
LEDNo

Questions about this item

Will the 50 mm square frame fit my case fan mount?

The frame measures 50 mm on each side and 10 mm thick, matching a standard 5010 mounting pattern.

How do I connect the three-wire lead to a 12 V header?

Plug the 3-wire connector onto a 12 V fan header; the third wire carries the tachometer signal so the board can read speed.

When should I plan to replace the sleeve bearing?

Expect typical sleeve-bearing life of several years at 0.12 A; replace when noise rises or rpm drops noticeably.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.