We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent 4010 sleeve-bearing fan with two-pin connector

OEM Industries

OEM Industries A4010L12S CPU cooler 12V .07A 4010

SKU CH-4AZM-9JGCR MPN A4010L12S

A 4010 transparent sleeve-bearing fan runs at 12 V and .07 A on a two-pin connector

  • ColorTransparent
  • TypeFan only
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • Compact 12 V fan draws only 0.07 A for low power use
  • Transparent frame lets you see the blades while the cooler runs
  • Sleeve bearing keeps operation quiet during everyday workloads
  • Simple two-pin connector plugs straight into standard headers
  • 4010 model fits tight spaces in small-form-factor builds

Compact 12 V fan for tight builds

The OEM Industries A4010L12S is a 4010-format fan designed for graphics-card coolers and other small-form-factor thermal solutions. It runs on 12 V and draws only .07 A, making it suitable for low-power auxiliary cooling where space is limited. The transparent frame and sleeve bearing keep the unit light and simple.

Two-pin power and sleeve bearing

A 2-pin connector provides basic voltage feed without PWM control, so speed is fixed by the supply voltage. The sleeve bearing offers quiet start-up in light-duty use, while the transparent blades let builders see airflow direction at a glance. No LED lighting is present, keeping the appearance neutral inside a case.

Low draw and modest airflow

At .07 A the fan adds minimal load to a 12 V rail, and the sleeve bearing runs quietly at the low speeds typical for chipset or VRM cooling. It is not designed for high-static-pressure CPU heatsinks or dense radiator stacks where greater airflow or PWM regulation would be required.

Highlights

  • Compact 12 V fan draws only 0.07 A for low power use
  • Transparent frame lets you see the blades while the cooler runs
  • Sleeve bearing keeps operation quiet during everyday workloads
  • Simple two-pin connector plugs straight into standard headers
  • 4010 model fits tight spaces in small-form-factor builds

Specifications

ModelA4010L12S
ColorTransparent
TypeFan only
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Questions about this item

What does the 2-pin power connector limit for the A4010L12S?

The 2-pin connector supplies fixed 12 V power without a PWM signal, so fan speed cannot be regulated by the motherboard and runs at full voltage continuously.

What physical space does the transparent 4010 frame require to mount?

The 40 mm square transparent frame needs a matching 40 mm mounting hole pattern and enough clearance for the sleeve-bearing rotor thickness.

How is the sleeve-bearing A4010L12S installed, and what step is often missed?

Align the four corner holes, secure with screws, then connect the 2-pin plug to a 12 V header; the missed step is verifying airflow direction matches the heatsink fins.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.