We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow single-mode fiber cable with one MPO12 APC connector splitting to two MPO12 APC connectors, 30m length

NVIDIA

NVIDIA Passive Fiber Cable SMF MPO12 APC to 2xMPO12 APC 30m

SKU CH-H5TS-HMKRE

A 30-metre single-mode passive fibre cable splitting one MPO12 APC connector into two

  • Single-mode fiber carries data over 30 m
  • MPO12 APC connectors ensure low-loss alignment
  • Y-split design fans out to two endpoints
  • Passive construction needs no external power

30-metre SMF MPO12 APC fibre cable

This passive NVIDIA cable uses single-mode fibre with angled-polish MPO12 connectors. One end terminates in a single MPO12 APC plug, the other splits into two MPO12 APC plugs. The assembly is rated for a 30-metre run.

Installers linking one trunk to two distribution

The Y-split design suits patch-panel architectures where a single backbone feeds two separate cassettes. Buyers needing a straight point-to-point link or multi-mode fibre should select a different cable. Those requiring active signal conditioning or longer reach than 30 metres must look elsewhere.

Highlights

  • Single-mode fiber carries data over 30 m
  • MPO12 APC connectors ensure low-loss alignment
  • Y-split design fans out to two endpoints
  • Passive construction needs no external power

Specifications

BrandNVIDIA

Questions about this item

How do I route the 30m single-mode fiber with MPO12 APC connectors through a cable tray without damaging the ferrules?

Pull the cable by the strength member, not the connector housing; keep bend radius above the manufacturer minimum and use protective caps on both MPO12 APC ends until seated.

When should I replace the 30m passive fiber cable if insertion loss rises on the MPO12 APC links?

Clean the MPO12 APC end faces first; if loss remains above the link budget after proper cleaning and re-inspection, replace the 30m cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.