We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow fiber cable with MPO12 APC connectors splitting to two ends

NVIDIA

NVIDIA Passive Fiber Cable MMF MPO12 APC to 2xMPO12 APC 10m

SKU CH-WBR3-R2JZ9

Passive multimode fiber cable with MPO12 APC connectors splitting to two MPO12 APC ends over ten metres

  • 10 metre reach connects racks without active gear
  • MPO12 APC connectors ensure low-loss multimode links
  • Passive design needs no power or configuration
  • Splits one trunk into two 12-fibre channels

10-metre passive fibre cable

This ten-metre passive fibre cable links equipment using single-mode fibre with angled physical contact polish. One end terminates in an MPO12 APC connector while the other splits into two MPO12 APC connectors. The assembly is designed for high-density patching in data-centre or high-performance computing environments.

Check connector polarity

Verify that your transceivers and patch panels accept MPO12 APC interfaces and that the link budget supports single-mode fibre over the required distance. Ensure the polarity scheme of the split end matches the equipment port mapping. Confirm that the cable jacket rating suits the installation pathway.

Highlights

  • 10 metre reach connects racks without active gear
  • MPO12 APC connectors ensure low-loss multimode links
  • Passive design needs no power or configuration
  • Splits one trunk into two 12-fibre channels

Specifications

No published specifications for this item yet.

Questions about this item

Does the 10 m cable include the MPO12 APC connectors on both ends or must they be purchased separately?

The cable arrives with one MPO12 APC connector on one end and two MPO12 APC connectors on the other, so no additional connectors are required.

Should I choose the 10 m length or the 20 m length for a rack-to-rack run of about 8 m?

The 10 m version provides enough slack for an 8 m run without the excess cable that a 20 m version would leave coiled in the rack.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.