We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
NVIDIA passive fiber cable MPO12 APC to dual MPO12 APC 7m

NVIDIA

NVIDIA Passive Fiber Cable MMF MPO12 APC to 2x MPO12 APC 7m

SKU CH-XX33-D5R3K

Passive multimode fiber cable with one MPO12 APC connector splitting to two MPO12 APC ends, seven metres long

  • 7 metre reach links racks without active gear
  • MPO12 APC connectors ensure low-loss multimode alignment
  • Passive design removes power and heat overhead
  • Splits one 12-fibre trunk into two 12-fibre paths

Passive 7 m MMF cable

This passive multimode fiber cable runs seven metres between equipment racks. It carries a single twelve-fibre MPO12 APC connection on one end and splits to two twelve-fibre MPO12 APC connectors on the other. The assembly is built for straight-through patching in high-density interconnects. No active electronics are included in the link.

MPO12 APC split design

The single-to-dual MPO12 APC breakout lets one transceiver port serve two separate patch-panel ports without intermediate cassettes. Angled-polish ferrules keep return loss low in dense multimode runs. The passive construction means no power draw and no firmware to manage, simplifying day-to-day moves, adds and changes in the data centre.

Highlights

  • 7 metre reach links racks without active gear
  • MPO12 APC connectors ensure low-loss multimode alignment
  • Passive design removes power and heat overhead
  • Splits one 12-fibre trunk into two 12-fibre paths

Specifications

BrandNVIDIA

Questions about this item

What multimode fibre standard does this MPO12 APC cable support and what distance does it cover?

The cable is a 7 metre multimode fibre assembly with MPO12 APC connectors on both ends, suitable for short‑reach links within a rack or row.

How many fibres does each MPO12 APC connector carry and what is the breakout configuration?

Each MPO12 APC connector carries 12 fibres; the assembly splits one 12‑fibre trunk into two separate 12‑fibre MPO12 APC connectors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.