We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black duplex fibre cable with LC connectors on both ends, 100 metre length

NShi

NShi OM3 LC/LC duplex multimode fibre optic cable 100 m OFNR

SKU CH-Q5W4-JA8S9

100 metre OM3 duplex multimode cable with LC/UPC connectors, 50/125 µm Corning core/cladding, OFNR jacket rated for indoor and outdoor use, supporting 10, 40 and 100 gigabit links up to 300 metres

  • 100 m reach for 10 GbE links over OM3 fibre
  • Riser-rated OFNR jacket meets indoor vertical-run codes
  • Corning 50/125 µm core/cladding for low-loss transmission
  • Duplex LC/UPC connectors enable bidirectional 1/10/40 Gbps traffic
  • Rugged black polyethylene sheath withstands indoor and outdoor use

100-metre OM3 duplex fibre cable

This 100-metre OM3 duplex multimode cable connects switches, routers or servers fitted with LC/UPC ports. It is built for indoor or outdoor campus links in education, corporate, defence, government, healthcare and finance environments where a single 100-metre run is required.

Indoor/outdoor OFNR riser jacket

The black polyethylene jacket is OFNR riser rated and zip-cord reinforced so the cable can be pulled through vertical shafts or conduit without a separate outdoor-to-indoor transition. Duplex LC/UPC terminations on both ends plug directly into SFP, SFP+ or QSFP modules, freeing patch-panel space that a breakout cassette would occupy.

10 to 100 Gbps headroom at 850 nm

At 850 nm the 50/125 µm Corning core supports 10GBase-SR up to 300 metres, 40GBase-SR4 up to 100 metres and 100GBase-SR10 up to 100 metres, while 1 GbE reaches 550 metres with a mode-conditioning cord. The 1500/2000 MHz·km modal bandwidth at 850/1300 nm means longer 40 GbE or 100 GbE links beyond 100 metres will need single-mode cable instead.

Highlights

  • 100 m reach for 10 GbE links over OM3 fibre
  • Riser-rated OFNR jacket meets indoor vertical-run codes
  • Corning 50/125 µm core/cladding for low-loss transmission
  • Duplex LC/UPC connectors enable bidirectional 1/10/40 Gbps traffic
  • Rugged black polyethylene sheath withstands indoor and outdoor use

Specifications

No published specifications for this item yet.

Questions about this item

How far can the 100 m OM3 cable reliably carry a 10 GbE signal?

The OM3 multimode fibre supports 10GBase-SR up to 300 m, so the 100 m length is well within the rated distance.

Does the black polyethylene jacket add noticeable heat or noise during continuous operation?

Fibre patch cables are passive and generate no heat or noise; the rugged jacket simply protects the fibres indoors or outdoors.

What transceiver interfaces are required at each end of this LC/UPC duplex jumper?

You need SFP or QSFP modules with LC duplex receptacles operating at 850 nm or 1300 nm to match the OM3 50/125 µm core/cladding.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.