We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black duplex fibre cable with LC/UPC connectors on both ends, 50 metre length

NShi

NShi OM3 LC/LC duplex fibre optic cable 50 m 10/40/100 Gbps OFNR

SKU CH-K4AX-ED197

OM3 duplex multimode patch cable with LC/UPC connectors, Corning 50/125 µm core/cladding, OFNR riser-rated jacket, supports 10/40/100 Gbps over 50 m

  • Supports 10/40/100 Gbps links up to 300 m
  • 50 m duplex run with LC/UPC connectors on both ends
  • OM3 multimode fibre rated for 1500/2000 MHz·km bandwidth
  • Corning 50/125 µm core/cladding for low-loss transmission
  • OFNR riser-rated jacket approved for indoor and outdoor use

NShi OM3 LC/LC duplex cable 50 m

This OM3 multimode patch cable runs fifty metres with LC/UPC connectors on both ends. It supports 10, 40 and 100 Gbps Ethernet over a 50/125 µm Corning core. The black polyethylene jacket is rated OFNR for indoor and outdoor riser installations.

Verify transceiver and switch compatibility

Confirm that your SFP or QSFP modules accept LC/UPC duplex connectors and operate at 850 nm. Ensure the link budget matches the 300 m reach for 10GBase-SR or the 100 m reach for 40GBase-SR4 and 100GBase-SR10. Check that your patch panels or enclosures accommodate zip-cord reinforced duplex cables.

Rugged OFNR jacket and zip-cord build

The riser-rated polyethylene sheath resists flame spread in vertical shafts and survives outdoor exposure. Zip-cord reinforcement keeps the two fibres aligned during pulls and prevents connector strain. LC/UPC ferrules provide low-loss mating for daily patching in cabinets or campus links.

Highlights

  • Supports 10/40/100 Gbps links up to 300 m
  • 50 m duplex run with LC/UPC connectors on both ends
  • OM3 multimode fibre rated for 1500/2000 MHz·km bandwidth
  • Corning 50/125 µm core/cladding for low-loss transmission
  • OFNR riser-rated jacket approved for indoor and outdoor use

Specifications

No published specifications for this item yet.

Questions about this item

Does the 50 m OM3 duplex cable arrive with both LC/UPC ends fitted, or must connectors be purchased separately?

The cable is supplied as a finished jumper with LC/UPC connectors on both ends, so no separate connectors are needed.

Which distance rating should I use when planning a 10 GbE link with this OM3 cable?

For 10GBase-SR the OM3 multimode fibre supports up to 300 m, so a 50 m run is well within specification.

What does the 10/40/100 Gbps label mean for actual throughput on this 50 m patch cord?

The cord meets OM3 modal bandwidth of 1500/2000 MHz-km at 850/1300 nm, enabling 10GBase-SR at 300 m, 40GBase-SR4 at 100 m and 100GBase-SR10 at 100 m.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.