We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NShi

NShi 4K USB 3.0 HDMI Capture Card 1080p 60fps 3.5mm mic

SKU CH-WPF7-PHBXN

Captures 1080p 60fps video from HDMI sources with USB 3.0 plug-and-play, HDMI loop-out, and a 3.5mm mic jack for live commentary

  • TypeExternal TV Tuner Box
  • InterfaceHDMI
  • SpecificationVideo Capture, Unbranded
  • FormatDigital & Analog
  • Max Monitor Supported5 Ports, HDMI Standard Output
  • VideoVideo Capture
  • Capture 1080p 60fps video from any HDMI source
  • Plug-and-play USB 3.0 device needs no drivers or external power
  • Zero-latency HDMI loop-out for live gaming without delay
  • 5 mm TRS microphone input adds live commentary while streaming
  • Works with Windows and Mac for Twitch, YouTube, OBS and more

Capture Card for HDMI Sources

The NShi USB 3.0 capture device records HDMI video at up to 1080p 60fps from consoles such as PS4, Xbox One, Wii U and DSLR cameras. It accepts 4K input at 30 or 60Hz and 1080p at 120 or 144Hz, while output is limited to 2K 30Hz. No drivers or external power are required; the unit appears as a webcam on Windows and Mac OS.

Passive Operation and Power

The aluminium enclosure runs without a fan, drawing all power from the USB 3.0 bus. Typical draw stays well below the port limit, so no separate adapter is needed. Silent operation means no audible noise during streams or recordings, and the low-latency path keeps gameplay responsive on the HDMI loop-out.

3.5 mm Microphone Input

A single 3.5 mm TRS jack mixes external commentary directly into the captured stream without extra software routing. The card works with OBS, Potplayer, VLC and major streaming platforms out of the box. Buyers needing XLR microphones, multi-channel audio or 4K 120Hz pass-through should consider other solutions.

Highlights

  • Capture 1080p 60fps video from any HDMI source
  • Plug-and-play USB 3.0 device needs no drivers or external power
  • Zero-latency HDMI loop-out for live gaming without delay
  • 5 mm TRS microphone input adds live commentary while streaming
  • Works with Windows and Mac for Twitch, YouTube, OBS and more

Specifications

Brandelgato
TypeExternal TV Tuner Box
InterfaceHDMI
SpecificationVideo Capture, Unbranded
FormatDigital & Analog
Max Monitor Supported5 Ports, HDMI Standard Output
VideoVideo Capture
Video InputHDMI Standard Output
Video OutputHDMI Standard Output
Audio OutputHDMI Standard Output
Other ConnectorHDMI Standard Output, USB 3.0
FeatureDigital & Analog
FeaturesHDMI Standard Output
Dimensions14.33in W x 12.83in H x 9.06in D
TV StandardsNTSC
Ports InUSB 3.0
Ports OutHDMI Standard Output
SpecificationsVideo Capture, Unbranded
Available SlotUSB 3.0

Questions about this item

How do I install the NShi capture card and which step do people often miss?

Connect the source to the HDMI input, plug the USB 3.0 cable into the computer, then select the device as a webcam in OBS or your streaming software; the step many skip is setting the project frame rate to 60 fps so the 1080p60 signal is not down-scaled.

What maintenance or replacement will the NShi capture card need later?

No internal parts require servicing; only the USB 3.0 cable and the 3.5 mm TRS microphone jack may wear out after repeated insertion cycles and can be replaced with standard cables.

What limit appears first during a long streaming session with the NShi capture card?

The output caps at 2K30 Hz, so even though the HDMI input accepts 1080p120 or 144 Hz, sustained capture is limited to 30 frames per second at the higher resolution.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.