We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red ultra-slim Cat 6 Ethernet cable with snagless RJ45 connectors, 7 ft length

Nippon Labs

Nippon Labs SLCAT6-28-7RD network ethernet cable Cat 6 28 AWG 7 ft Red

SKU CH-13BX-5FND8 MPN SLCAT6-28-7RD

Ultra-slim Cat 6 patch cable with snagless RJ45 connectors supports 550 MHz bandwidth for 10-Gigabit Ethernet in a 7 ft red stranded design

  • TypeNetwork Ethernet Cable
  • Cat6
  • Connector A1 x RJ45
  • Connector B1 x RJ45
  • Length7 ft.
  • ColorRed
  • Supports 10-Gigabit Ethernet with 550 MHz bandwidth
  • Pure bare copper conductors prevent signal loss
  • 28 AWG ultra-slim design fits high-density racks
  • Snagless narrow boots protect connector tabs
  • Gold-plated RJ45 contacts resist corrosion

Ultra-slim Cat 6 patch cable for dense installs

This 7 ft red Cat 6 cable uses 28 AWG stranded conductors and a narrow snagless boot to fit tight spaces in patch panels, racks or behind desks. Gold-plated RJ45 connectors on both ends resist corrosion and maintain signal quality. It is built for home offices, small businesses or data-centre patching where cable bulk is a concern.

Suited for short Gigabit

The ultra-slim profile eases routing through congested cable managers and high-density switch ports. Installers who need longer permanent runs, outdoor burial, plenum-rated jacket or solid-conductor cable for structured wiring should look at a different product type.

550 MHz bandwidth rating

The cable is specified to 550 MHz, which supports 10-Gigabit Ethernet over the 7 ft length provided. If your installation demands a higher certified frequency or a different category rating, this cable will not meet that requirement.

Highlights

  • Supports 10-Gigabit Ethernet with 550 MHz bandwidth
  • Pure bare copper conductors prevent signal loss
  • 28 AWG ultra-slim design fits high-density racks
  • Snagless narrow boots protect connector tabs
  • Gold-plated RJ45 contacts resist corrosion

Specifications

BrandNippon Labs
ModelSLCAT6-28-7RD
TypeNetwork Ethernet Cable
Cat6
Connector A1 x RJ45
Connector B1 x RJ45
Length7 ft.
ColorRed
Wire Gauge28 AWG
Features28 AWG
550Mhz
UTP
Snagless Ultra Slim Cat6
Shipping weight0.05 kg
Package size215 × 149 × 24 mm

Questions about this item

What devices must I already have to use this Cat 6 cable?

You need two devices with RJ45 ports such as a router, switch, network printer, NAS, VoIP phone or PoE equipment. The cable has RJ45 connectors on both ends.

Does the 550 MHz rating let it run alongside my existing Gigabit Ethernet gear?

Yes. The cable is backward compatible with existing Fast Ethernet and Gigabit Ethernet while supporting up to 550 MHz for 10-Gigabit Ethernet.

How can I confirm the cable is delivering 550 MHz performance after I plug it in?

Run a cable certifier or a 10-Gigabit link test; a stable 10 Gbps connection with low error counts verifies the 550 MHz capability.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.