We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 28 AWG Cat6 Ethernet cable 15 ft with snagless RJ45 connectors

Nippon Labs

Nippon Labs SLCAT6-28-15GN 28 AWG Cat6 network ethernet cable 15 ft Green

SKU CH-TVA8-WHMZS MPN SLCAT6-28-15GN

A 15 ft Cat6 patch cable with 28 AWG stranded bare copper conductors, gold-plated RJ45 connectors, snagless ultra-slim boots, and 550 MHz bandwidth for 10-Gigabit Ethernet

  • TypeNetwork Ethernet Cable
  • Cat6
  • Connector A1 x RJ45
  • Connector B1 x RJ45
  • Length15 ft.
  • ColorGreen
  • Snagless boot eases routing in tight panels
  • 28 AWG stranded copper keeps cable flexible for dense racks
  • 550 MHz bandwidth supports 10 Gigabit Ethernet speeds
  • Gold-plated RJ45 contacts resist corrosion for lasting signal quality
  • 15 ft green jacket simplifies colour-coded network runs

15 ft Cat6 cable for dense patches

This 15 ft Cat6 patch cable uses 28 AWG stranded bare-copper conductors and gold-plated RJ45 plugs to link routers, switches, NAS units, VoIP phones and PoE devices. The ultra-slim profile and snagless boots let it route cleanly through crowded racks and patch panels. It is rated for 550 MHz bandwidth and supports 10-Gigabit Ethernet while remaining backward compatible with Fast Ethernet and Gigabit Ethernet.

Replaces bulky Cat5e or standard Cat6 runs

Swap this cable in when existing patch leads are too thick for high-density panels or when snagging boots damage adjacent ports during moves. The 28 AWG construction saves space in cable managers and improves airflow, making the upgrade worthwhile wherever rack density or frequent re-patching are daily concerns.

Limited by Cat6 UTP distance and connector density

Unshielded twisted-pair Cat6 is specified for 10 Gbps only up to 55 metres, so 10-Gigabit links longer than that will fall back to 1 Gbps. The RJ45 footprint still governs port spacing, so the cable cannot overcome the physical port pitch of the switch or panel it plugs into.

Highlights

  • Snagless boot eases routing in tight panels
  • 28 AWG stranded copper keeps cable flexible for dense racks
  • 550 MHz bandwidth supports 10 Gigabit Ethernet speeds
  • Gold-plated RJ45 contacts resist corrosion for lasting signal quality
  • 15 ft green jacket simplifies colour-coded network runs

Specifications

BrandNippon Labs
ModelSLCAT6-28-15GN
TypeNetwork Ethernet Cable
Cat6
Connector A1 x RJ45
Connector B1 x RJ45
Length15 ft.
ColorGreen
Wire Gauge28 AWG
Features28 AWG
550Mhz
UTP
Snagless Ultra Slim Cat6
Shipping weight0.09 kg
Package size212 × 159 × 29 mm

Questions about this item

Will the 28 AWG stranded cable with snagless boots fit into a high-density patch panel?

The 28 AWG wire gauge and narrow snagless boot design are intended for high-density environments such as data centres or telecommunications rooms.

What is the step people get wrong when installing the RJ45 connectors on this 15 ft Cat6 cable?

Not pushing each RJ45 connector fully home until the tab clicks, which leaves the gold-plated contacts partially seated and causes intermittent link errors.

How often should the gold-plated RJ45 connectors on this stranded bare copper cable be inspected or replaced?

Inspect the connectors whenever cables are moved; replace any cable if the snagless tab breaks or the gold plating shows wear that affects the connection.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.