We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Nippon Labs

Nippon Labs SLCAT6-28-14BL network ethernet cable 14 ft Cat 6 28 AWG 550MHz Blue

SKU CH-REKT-HN3ET MPN SLCAT6-28-14BL

14 ft Cat 6 Ethernet cable with 28 AWG stranded copper, 550 MHz bandwidth, snagless RJ45 connectors and slim profile for dense installs

  • TypeNetwork Ethernet Cable
  • Cat6
  • Connector A1 x RJ45
  • Connector B1 x RJ45
  • Length14 ft.
  • ColorBlue
  • Pure bare copper conductors ensure reliable signal integrity
  • 28 AWG stranded design enables flexible routing in tight spaces
  • Snagless narrow boot prevents latch damage during frequent changes
  • 550 MHz bandwidth supports 10 Gigabit Ethernet performance
  • 14 foot length fits typical desk-to-switch runs

Compact Cat 6 cable for dense setups

This 14 ft Cat 6 patch cable uses a 28 AWG ultra-slim profile to fit tight cable runs in offices and data centres. It connects routers, switches, NAS units, VoIP phones and PoE devices with standard RJ45 ends. The stranded bare copper conductors keep the link reliable for everyday networking tasks. Backward compatibility covers existing Fast Ethernet and Gigabit Ethernet gear.

Thermals noise and power draw

Passive copper construction means the cable generates no heat and adds no audible noise to the installation. It draws zero power of its own, so it does not affect the power budget of connected switches or PoE endpoints. Gold-plated contacts resist corrosion and maintain low contact resistance over time. The UTP design avoids the bulk and grounding complications of shielded alternatives.

Snagless boot and slim diameter

The narrow snagless boot prevents the latch from catching on adjacent cables during moves or maintenance. At 28 AWG the jacket is significantly thinner than standard Cat 6, improving airflow in high-density panels and reducing strain on port blocks. Pure bare copper conductors rated to 550 MHz support 10-Gigabit Ethernet across the full 14 ft length. Blue colour coding helps identify cable runs at a glance.

Highlights

  • Pure bare copper conductors ensure reliable signal integrity
  • 28 AWG stranded design enables flexible routing in tight spaces
  • Snagless narrow boot prevents latch damage during frequent changes
  • 550 MHz bandwidth supports 10 Gigabit Ethernet performance
  • 14 foot length fits typical desk-to-switch runs

Specifications

BrandNippon Labs
ModelSLCAT6-28-14BL
TypeNetwork Ethernet Cable
Cat6
Connector A1 x RJ45
Connector B1 x RJ45
Length14 ft.
ColorBlue
Features28 AWG
550Mhz
UTP
Snagless Ultra Slim Cat6
Shipping weight0.08 kg
Package size210 × 152 × 36 mm

Questions about this item

How do I plug the 28 AWG cable into a high-density patch panel without snagging the latch?

The narrow snagless boot slides past neighbouring ports; press the RJ45 tab down while inserting until it clicks into the 45-degree angled jack.

When will the gold-plated RJ45 contacts or stranded copper conductors need replacement?

Gold plating resists corrosion and stranded bare copper tolerates repeated bending; replace only if the latch breaks or a continuity tester shows open pairs.

At what point does the 550 MHz rating limit sustained 10-Gigabit throughput?

The 550 MHz bandwidth supports 10-Gigabit Ethernet up to the full 14 ft length; beyond that distance signal attenuation becomes the limiting factor.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.