Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Nippon Labs
10 m active optical HDMI 2.1 cable delivers 48 Gbps bandwidth for 8K at 60 Hz and 4K at 120 Hz without signal loss over long runs
This 10 metre active optical HDMI cable is built for installers and home-theatre owners who need to run an 8K or high-refresh 4K signal over distances that exceed the practical limit of passive copper. The hybrid fibre construction carries the full 48 Gbps bandwidth without signal degradation. It targets commercial signage, medical imaging and residential projector runs where cable length is the primary constraint.
The single specification that determines fit is the certified 48 Gbps throughput, which enables 7680 × 4320 at 60 Hz, 4K at 120 Hz and all intermediate rates such as 4K 100 Hz. HDCP 2.2 and eARC are supported, and the cable is backward compatible with HDMI 2.0 and 1.4 sources. If the installation requires higher bandwidth than 48 Gbps or a different connector type, this cable will not meet the requirement.
The fibre-optic link produces no audible fan or coil noise because it draws power only from the HDMI ports and contains no active cooling. Heat output is negligible during normal operation, and the thin hybrid jacket remains cool to the touch. Power consumption stays within the HDMI port specification, so no external adapter is required for standard source and display devices.
| Brand | Nippon Labs |
|---|---|
| Model | SHDC-AOC-010 |
| Type | HDMI Cables |
| Cable Length | 32.81 ft. (10m) |
| Connector Number | 2 |
| Connect From | 1 x HDMI 2.1 Male |
| Connect To | 1 x HDMI 2.1 Male |
| Terminal Gender | Male to Male |
| Features | Plug and Play Compatible with HDMI 2.1 standard Backward compatible with HDMI 2.0/HDMI 1.4 Support HDCP Support 48G Bandwidth with 4Kp50/60/100/120 and 8Kp50/60 Self-detecting function for EDID information Support eARC No loss of signal - delivering crystal clear digital images instantly Dynamic HDR formats is supported Hybrid optical cable with fiber and copper wire |
| Shipping weight | 0.75 kg |
| Package size | 274 × 208 × 130 mm |
The active optical design maintains full 48Gbps bandwidth over the 10 metre length, enabling 8K at 60Hz or 4K at 120Hz without the signal loss typical of copper cables at this distance.
HDMI 2.1 with HDCP 2.2 supports protected 8K and 4K streams at up to 48Gbps, so premium content services and UHD Blu-ray playback work at full resolution and frame rate.
Each end uses a standard HDMI 2.1 male plug; verify your source and display have matching female ports and allow enough clearance for the connector housing.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?