We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SATA cable, 9.6 in, 90-degree to 180-degree connectors, rubber sleeving

Nippon Labs

Nippon Labs SATA3L0.8FT-90/180BK SATA cable 9.6 in 90 to 180 degree

SKU CH-4551-4JBJE MPN SATA3L0.8FT-90/180BK

A 9.6 in SATA III cable with a 90 degree to 180 degree connector layout and latching ends for 6 Gb/s drives

  • TypeSATA III
  • ColorBlack
  • Length0.8 ft.
  • Cable Length9.6 in.
  • Connector Number2
  • Connector Detail90 degree to 180 degree
  • SATA 6 Gb/s speed with backward compatibility to 1.5 and 3 Gb/s
  • 6 inch length fits tight chassis and reduces cable clutter
  • 90 to 180 degree connectors simplify routing behind drives and motherboards
  • Latching design secures connection against vibration and accidental disconnects
  • Flexible rubber sleeving bends and twists without damaging internal wires

Cable purpose and fit

The Nippon Labs SATA3L0.8FT-90/180BK is a SATA III cable built for tight internal routing where a straight connector would block adjacent ports or press against a drive cage. Its short 9.6 in length suits builders who need a direct link between a motherboard header and a nearby SSD or hard drive without excess slack.

Build quality and daily handling

Durable flexible rubber sleeving protects the conductors while allowing the cable to be bent and twisted during installation. One end terminates in a 90 degree right-angle plug and the other in a 180 degree straight plug, both featuring latching mechanisms that hold firm under vibration yet release cleanly when devices are swapped.

Upgrade context and limits

This cable replaces older SATA leads that only support 1.5 Gb/s or 3 Gb/s, enabling the full 6 Gb/s throughput of modern solid-state drives. It is not suited for runs longer than 9.6 in, for external eSATA ports, or for builders who require angled connectors at both ends.

Highlights

  • SATA 6 Gb/s speed with backward compatibility to 1.5 and 3 Gb/s
  • 6 inch length fits tight chassis and reduces cable clutter
  • 90 to 180 degree connectors simplify routing behind drives and motherboards
  • Latching design secures connection against vibration and accidental disconnects
  • Flexible rubber sleeving bends and twists without damaging internal wires

Specifications

BrandNippon Labs
ModelSATA3L0.8FT-90/180BK
TypeSATA III
ColorBlack
Length0.8 ft.
Cable Length9.6 in.
Connector Number2
Connector Detail90 degree to 180 degree
FeaturesSupported SATA 6 Gb/s technology
Backward compatible with 3 Gb/s and 1.5 Gb/s
Durable flexible rubber sleeving can be bent and twisted.
The ability to connect and disconnect devices without prior notification.
RoHS compliant.
Shipping weight0.01 kg
Package size178 × 75 × 25 mm

Questions about this item

What speed does the SATA III interface on this cable actually deliver?

The cable supports SATA 6 Gb/s and is backward compatible with 3 Gb/s and 1.5 Gb/s devices.

Will the 90-degree and 180-degree connectors fit my drive and motherboard ports?

One end is a 90-degree right-angle plug and the other is a straight 180-degree plug, both standard SATA male connectors.

How do I install the latching connectors without damaging the port?

Align the L-shaped key on each connector, push straight in until the metal latch clicks, and press the latch release before pulling it out.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.