We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
UV red SATA III cable, 1.5 ft, rubber sleeving, latching connectors

Nippon Labs

Nippon Labs SATA3L-1.5FT-RD 1.5 ft SATA III cable UV Red

SKU CH-257W-CSYQ7 MPN SATA3L-1.5FT-RD

1.5 ft SATA III cable supports 6 Gb/s speeds with durable rubber sleeving in UV Red

  • TypeSATA III
  • ColorUV Red
  • Length1.5 ft.
  • Cable Length1.5 ft.
  • Connector Number2
  • FeaturesSupported SATA 6 Gb/s technology Backward compatible with 3
  • SATA 6 Gb/s speed with backward compatibility to 3 Gb/s and 1.5 Gb/s
  • Latching connectors ensure a secure connection for two devices
  • Flexible rubber sleeving allows tight bends and twists inside the case
  • UV Red colour adds a distinctive look for themed builds
  • 5 ft length keeps cable routing tidy in compact chassis

SATA III 1.5 ft UV Red cable

This SATA III cable measures 1.5 ft and carries a UV Red jacket. It supports the 6 Gb/s transfer rate while remaining backward compatible with 3 Gb/s and 1.5 Gb/s devices. Two straight male connectors feature latching ends for a secure fit. The flexible rubber sleeving bends easily inside tight chassis.

Builders needing a short internal link

The short length suits compact cases or drive cages where excess cable would block airflow. It works for any SATA SSD, HDD or optical drive that uses the standard interface. Systems that require longer runs, right-angle connectors or external eSATA ports should choose a different cable.

Sustained transfer stability

The 6 Gb/s signalling is maintained across the full 1.5 ft without the signal degradation that can appear on longer runs. Backward compatibility ensures older 3 Gb/s and 1.5 Gb/s drives negotiate their maximum speed reliably. RoHS compliant materials keep performance consistent over extended use.

Highlights

  • SATA 6 Gb/s speed with backward compatibility to 3 Gb/s and 1.5 Gb/s
  • Latching connectors ensure a secure connection for two devices
  • Flexible rubber sleeving allows tight bends and twists inside the case
  • UV Red colour adds a distinctive look for themed builds
  • 5 ft length keeps cable routing tidy in compact chassis

Specifications

BrandNippon Labs
ModelSATA3L-1.5FT-RD
TypeSATA III
ColorUV Red
Length1.5 ft.
Cable Length1.5 ft.
Connector Number2
FeaturesSupported SATA 6 Gb/s technology
Backward compatible with 3 Gb/s and 1.5 Gb/s
Durable flexible rubber sleeving can be bent and twisted.
The ability to connect and disconnect devices without prior notification.
RoHS compliant.
Shipping weight0.02 kg
Package size119 × 99 × 17 mm

Questions about this item

What motherboard port do I need to plug this SATA III cable into?

A standard SATA 6 Gb/s port on the motherboard is required; the cable also works with older 3 Gb/s and 1.5 Gb/s ports.

Will this 1.5 ft cable reach a drive mounted in a 3.5-inch bay on an older case?

The short 1.5 ft length suits tight internal routing; measure the path from your motherboard SATA port to the drive bay to confirm reach.

How can I verify the link is running at 6 Gb/s after I connect the cable?

Check the negotiated speed in BIOS or the operating system storage information; it should report 6 Gb/s when both host and drive support SATA III.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.