We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SATA cable with straight connectors on both ends, 1.5 ft length, flexible rubber sleeve

Nippon Labs

Nippon Labs SATA3-R-1.5FT-BK 1.5 ft SATA cable

SKU CH-AK48-KJTFT MPN SATA3-R-1.5FT-BK

A 1.5 ft SATA III cable with straight connectors on both ends, rated for 6 Gb/s and backward compatible with slower speeds

  • TypeSATA III
  • ColorBlack
  • Length1.5 ft.
  • Cable Length1.5 ft.
  • Connector Number2
  • Connector DetailSATA3 Straight to SATA3 Straight
  • 6 Gb/s SATA III speed for fast data transfer
  • Backward compatible with 3 Gb/s and 1.5 Gb/s devices
  • Flexible rubber sleeving bends easily in tight spaces
  • Hot-swap capable connectors allow drive changes without shutdown
  • Round cable design simplifies routing inside the case

Short internal SATA cable

The Nippon Labs SATA3-R-1.5FT-BK is a 1.5 ft SATA III cable with straight connectors on both ends. It suits builders who need a short link between a motherboard port and a nearby drive bay. The 6 Gb/s rating is backward compatible with 3 Gb/s and 1.5 Gb/s devices. Buyers who want longer runs or right-angle plugs should choose a different model.

Thermals noise and power

A passive copper cable adds no heat, noise or measurable power draw to the system. The flexible rubber sleeving resists kinks when routed past other components. Round construction keeps the bundle slim for tidy cable management. No active cooling or external power is involved.

Round sleeving and compliance

The round black jacket eases routing in tight chassis corners compared with flat ribbon alternatives. RoHS and UL markings confirm restricted-substance and safety compliance. Hot-plug capability lets you swap drives without a prior software notification. No software, adapters or mounting hardware are bundled.

Highlights

  • 6 Gb/s SATA III speed for fast data transfer
  • Backward compatible with 3 Gb/s and 1.5 Gb/s devices
  • Flexible rubber sleeving bends easily in tight spaces
  • Hot-swap capable connectors allow drive changes without shutdown
  • Round cable design simplifies routing inside the case

Specifications

BrandNippon Labs
ModelSATA3-R-1.5FT-BK
TypeSATA III
ColorBlack
Length1.5 ft.
Cable Length1.5 ft.
Connector Number2
Connector DetailSATA3 Straight to SATA3 Straight
Speed6 Gb/s
FeaturesSupported SATA 6 Gb/s technolog
Backward compatible with 3 Gb/s and 1.5 Gb/s
Durable flexible rubber sleeving cab be bent and twisted.
The ability to connect and disconnect devices without prior notification.
RoHS compliant.
Round Cable for Easier Routing in Tight Areas
UL compliant
Shipping weight0.02 kg
Package size145 × 97 × 29 mm

Questions about this item

How do I install the SATA3-R-1.5FT-BK cable and what step is often missed?

Plug each straight SATA III connector firmly until it clicks; the step people miss is not seating the latch fully, which can cause intermittent 6 Gb/s link errors.

What maintenance or replacement will the Nippon Labs SATA3-R-1.5FT-BK need later?

No scheduled maintenance is required; replace the cable only if the rubber sleeving shows cuts or the connectors become loose after repeated mating cycles.

What limit appears first on the SATA3-R-1.5FT-BK under sustained 6 Gb/s use?

The 1.5 ft length is the practical limit; signal integrity at 6 Gb/s is guaranteed only up to this distance, so longer runs would need a different cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.