We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red SATA III cable, 1.5 ft long, flexible rubber sleeving, two straight connectors

Nippon Labs

Nippon Labs SATA3-1.5FT-RD 1.5 ft SATA III cable red

SKU CH-8CRW-NDPM9 MPN SATA3-1.5FT-RD

Connects SATA drives at 6 Gb/s with a 1.5 ft red cable featuring flexible rubber sleeving

  • TypeSATA III
  • ColorRed
  • Length1.5 ft.
  • Cable Length1.5 ft.
  • Connector Number2
  • FeaturesSupported SATA 6 Gb/s technology Backward compatible with 3
  • 6 Gb/s SATA III speed for fast data transfer
  • Backward compatible with 3 Gb/s and 1.5 Gb/s devices
  • Flexible rubber sleeving resists bending and twisting damage
  • Hot-swap support lets you connect drives without powering down
  • RoHS compliant materials meet environmental standards

SATA III cable for 6 Gb/s drives

This 1.5 ft red SATA III male-to-male cable links a drive to a host controller at up to 6 Gb/s. Flexible rubber sleeving resists tight bends inside compact cases. The cable is backward compatible with 3 Gb/s and 1.5 Gb/s devices. RoHS compliant construction meets restricted-substance requirements.

Builders needing a short internal link

Suits anyone connecting a single SSD or hard drive close to the motherboard port. The 1.5 ft length reduces clutter in small chassis. Builders who need to span larger cases or route behind drive cages should look at longer cables. Hot-plug support allows drive changes without system shutdown.

1.5 ft length decides fit

At exactly 1.5 ft the cable reaches only nearby ports, so measure the motherboard-to-drive path before ordering. Two straight connectors are provided with no right-angle option. The red UV-reactive sleeve aids cable identification in lit builds.

Highlights

  • 6 Gb/s SATA III speed for fast data transfer
  • Backward compatible with 3 Gb/s and 1.5 Gb/s devices
  • Flexible rubber sleeving resists bending and twisting damage
  • Hot-swap support lets you connect drives without powering down
  • RoHS compliant materials meet environmental standards

Specifications

BrandNippon Labs
ModelSATA3-1.5FT-RD
TypeSATA III
ColorRed
Length1.5 ft.
Cable Length1.5 ft.
Connector Number2
FeaturesSupported SATA 6 Gb/s technology
Backward compatible with 3 Gb/s and 1.5 Gb/s
Durable flexible rubber sleeving can be bent and twisted.
The ability to connect and disconnect devices without prior notification.
RoHS compliant.
Shipping weight0.01 kg
Package size135 × 95 × 23 mm

Questions about this item

Will the 6 Gb/s rating still apply if I plug this cable into a 3 Gb/s port?

Yes, the cable is backward compatible with 3 Gb/s and 1.5 Gb/s ports, so it will negotiate the lower speed automatically.

Does the SATA III interface on this cable limit the maximum throughput of a modern SSD?

The cable supports SATA 6 Gb/s technology, which is the ceiling for the SATA III interface itself; any SATA SSD will be limited by that bus speed.

How much clearance do I need behind the drive tray for the 1.5 ft red cable and its rubber sleeving?

The cable is 1.5 ft long with durable flexible rubber sleeving that can be bent and twisted, so it fits in tight drive bays without kinking.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.