We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue SATA III cable, 1.5 ft, rubber-sleeved, male-to-male connectors

Nippon Labs

Nippon Labs SATA3-1.5FT-BU 1.5 ft SATA III cable

SKU CH-JNCD-QWWDK MPN SATA3-1.5FT-BU

A 1.5 ft SATA III cable with two connectors, 6 Gb/s support, backward compatibility, flexible rubber sleeving and RoHS compliance

  • TypeSATA III
  • ColorBlue
  • Length1.5 ft.
  • Cable Length1.5 ft.
  • Connector Number2
  • FeaturesSupported SATA 6 Gb/s technology Backward compatible with 3

Style Single Pack

  • 6 Gb/s transfer speed with SATA III support
  • Works with 3 Gb/s and 1.5 Gb/s devices
  • Flexible rubber sleeving bends and twists easily
  • Hot-plug capable for drive changes without shutdown
  • 5 ft length suits tight internal routing

Compact SATA III cable for tight builds

The Nippon Labs SATA3-1.5FT-BU is a 1.5 ft internal cable with two straight male connectors. It supports SATA 6 Gb/s and is backward compatible with 3 Gb/s and 1.5 Gb/s devices. The UV blue rubber sleeving stays flexible for routing in small cases. RoHS compliant construction meets current environmental standards.

Suited to short runs between adjacent drives

This length works well when the motherboard port sits close to a 2.5 inch SSD or a compact optical drive. Builders who need to span a full tower chassis or route behind a large graphics card will find the cable too short. The fixed straight connectors also limit options where a right angle plug would relieve strain.

Stable throughput during extended transfers

The SATA III signalling maintains 6 Gb/s bandwidth across the 1.5 ft run without the signal degradation that longer cables can introduce. Rubber sleeving resists kinking when the cable is bent repeatedly during drive swaps. Hot-plug capability lets users connect or disconnect drives without powering down the system.

Highlights

  • 6 Gb/s transfer speed with SATA III support
  • Works with 3 Gb/s and 1.5 Gb/s devices
  • Flexible rubber sleeving bends and twists easily
  • Hot-plug capable for drive changes without shutdown
  • 5 ft length suits tight internal routing

Specifications

BrandNippon Labs
ModelSATA3-1.5FT-BU
TypeSATA III
ColorBlue
Length1.5 ft.
Cable Length1.5 ft.
Connector Number2
FeaturesSupported SATA 6 Gb/s technology
Backward compatible with 3 Gb/s and 1.5 Gb/s
Durable flexible rubber sleeving can be bent and twisted.
The ability to connect and disconnect devices without prior notification.
RoHS compliant.
Shipping weight0.01 kg
Package size159 × 83 × 23 mm

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What SATA port speed does my motherboard need for this cable to run at 6 Gb/s?

A SATA 6 Gb/s port is required for full speed; the cable also works with 3 Gb/s and 1.5 Gb/s ports at their respective speeds.

Will this 1.5 ft blue cable fit alongside older 3 Gb/s drives I keep in the same system?

Yes, it is backward compatible with 3 Gb/s and 1.5 Gb/s devices, so existing drives connect without issue.

How can I confirm the link is running at 6 Gb/s after I connect the cable?

Check the motherboard BIOS or OS disk utility for a negotiated SATA 6 Gb/s link speed on the attached drive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.