We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten black SATA III cables with straight male connectors, 1.5 ft each, rubber-sleeved

Nippon Labs

Nippon Labs SATA3-1.5FT-BK-10P SATA cable 1.5 ft 10 pack

SKU CH-J246-6K1V2 MPN SATA3-1.5FT-BK-10P

Ten-pack of 1.5 ft SATA III cables with 6 Gb/s support and flexible rubber sleeving

  • TypeSATA III
  • ColorBlack
  • Length1.5 ft.
  • Cable Length1.5 ft.
  • Connector Number2
  • Connector Detail1 x SATA to 1 x SATA
  • SATA 6 Gb/s speed for fast data transfers
  • Backward compatible with 3 Gb/s and 1.5 Gb/s drives
  • Flexible rubber sleeving bends and twists for easy routing
  • Hot-swap capable connectors allow drive changes without shutdown
  • Ten cables in one pack for multiple installations

10-pack 1.5 ft SATA III cables

This 10-pack supplies black SATA III male-to-male cables, each 1.5 ft long. They connect solid-state drives, hard drives or optical drives to a motherboard or controller. Builders wiring multiple bays or assembling several systems get a consistent cable length in one purchase.

SATA 6 Gb/s practical limits

The cables support SATA 6 Gb/s technology and remain backward compatible with 3 Gb/s and 1.5 Gb/s devices. Real-world throughput depends on the drive and controller, not the cable alone. The 1.5 ft length keeps signal loss low inside standard chassis while limiting reach to nearby ports.

Replaces loose or short cables

These replace mismatched, damaged or too-short SATA leads that clutter a build or restrict drive placement. The flexible rubber sleeving eases routing around tight corners. The jump is worth it when you need ten uniform cables for a multi-drive array or a batch of fresh builds.

Highlights

  • SATA 6 Gb/s speed for fast data transfers
  • Backward compatible with 3 Gb/s and 1.5 Gb/s drives
  • Flexible rubber sleeving bends and twists for easy routing
  • Hot-swap capable connectors allow drive changes without shutdown
  • Ten cables in one pack for multiple installations

Specifications

BrandNippon Labs
ModelSATA3-1.5FT-BK-10P
TypeSATA III
ColorBlack
Length1.5 ft.
Cable Length1.5 ft.
Connector Number2
Connector Detail1 x SATA to 1 x SATA
Terminal GenderMale to Male
FeaturesSupported SATA 6 Gb/s technology
Backward compatible with 3 Gb/s and 1.5 Gb/s
Durable flexible rubber sleeving can be bent and twisted.
The ability to connect and disconnect devices without prior notification.
RoHS compliant.
Shipping weight0.27 kg
Package size203 × 140 × 70 mm

Questions about this item

Which cable length should I choose for a compact build?

Each cable measures 1.5 ft and the pack contains 10 identical cables, so choose this pack when you need multiple short runs in a tight chassis.

What does the SATA 6 Gb/s rating mean for my SSD or HDD?

The cable supports the SATA III 6 Gb/s interface, allowing modern SSDs and hard drives to operate at their full rated throughput when connected to a compatible motherboard port.

What interface standard does this cable use and what speed does it cap at?

It uses the SATA interface and is built to the SATA III 6 Gb/s specification, which is the maximum speed the SATA standard defines for internal storage connections.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.