We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red SATA III cable with a 90-degree right-angle connector, 1.5 ft length

Nippon Labs

Nippon Labs SATA3-1.5FT-90R 1.5 ft SATA III right-angle cable Red

SKU CH-ZA2F-VE8SD MPN SATA3-1.5FT-90R

A 1.5 ft red SATA cable with a 90-degree right-angle connector for tight spaces, supporting 6 Gb/s speeds

  • TypeSATA III
  • ColorRed
  • Length1.5 ft.
  • Cable Length1.5 ft.
  • Connector Number2
  • Connector DetailConnector A: 90 degree-right angle connector Connector A: SA
  • Right-angle connector fits tight drive bays
  • 5 ft length reduces cable clutter inside cases
  • SATA 6 Gb/s support keeps SSD and HDD speeds intact
  • Backward compatible with 3 Gb/s and 1.5 Gb/s devices
  • Red rubber sleeving aids quick cable identification

Short internal cable for tight builds

This 1.5 ft SATA III cable uses a 90 degree right-angle connector on one end and a straight connector on the other. The red sleeving is durable, flexible rubber that bends and twists without kinking. It supports 6 Gb/s and is backward compatible with 3 Gb/s and 1.5 Gb/s devices. Hot-plug capability allows drive changes without powering down.

Replaces long straight cables in cramped cases

Builders upgrading from standard straight-to-straight cables gain clearance behind drives and near motherboard headers. The right-angle end tucks close to the drive PCB, reducing strain on the port when the side panel closes. The jump is worth it when cable routing space is under 15 cm or when airflow is blocked by excess slack.

Handles one drive with minimal slack

The 1.5 ft length connects a single SSD or HDD to a nearby motherboard port with no coils to manage. It runs out of reach for bottom-mounted drive bays in full-tower chassis or for routing behind a motherboard tray. Buyers needing longer runs or multiple drive connections should select a different length.

Highlights

  • Right-angle connector fits tight drive bays
  • 5 ft length reduces cable clutter inside cases
  • SATA 6 Gb/s support keeps SSD and HDD speeds intact
  • Backward compatible with 3 Gb/s and 1.5 Gb/s devices
  • Red rubber sleeving aids quick cable identification

Specifications

BrandNippon Labs
ModelSATA3-1.5FT-90R
TypeSATA III
ColorRed
Length1.5 ft.
Cable Length1.5 ft.
Connector Number2
Connector DetailConnector A: 90 degree-right angle connector
Connector A: SATA3 Straight
FeaturesSupported SATA 6 Gb/s technology
Backward compatible with 3 Gb/s and 1.5 Gb/s
Durable flexible rubber sleeving can be bent and twisted.
The ability to connect and disconnect devices without prior notification.
RoHS compliant.
Shipping weight0.02 kg
Package size164 × 84 × 17 mm

Questions about this item

Will the 90-degree connector clear a drive bay with 15 mm of space behind the drive?

The right-angle plug adds roughly 15 mm of depth from the drive's SATA port, so measure your clearance against that figure.

Do I need to latch the straight connector to the motherboard before routing the cable?

Yes — seat the straight SATA III plug firmly until the metal clip clicks, then route the flexible red sleeve to the drive; reversing the order often bends the cable sharply at the right-angle end.

How often should I replace a SATA III cable that stays permanently installed?

RoHS-compliant rubber sleeving resists embrittlement, so replacement is only needed if the latch breaks or the cable is repeatedly flexed near the 90-degree bend.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.