Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Nippon Labs
A shielded 26 AWG SATA cable with one right-angle and one straight locking connector for tight builds
The Nippon Labs SATA-1-MINI is a 3.28 ft red cable that connects a high-speed Serial ATA device to a Serial ATA controller. It uses two shielded 26 AWG conductors with a right-angle plug on one end and a straight plug on the other. Both male connectors feature a locking latch for secure retention. The narrow profile simplifies cable routing and improves airflow inside the chassis.
The single specification that decides fit is the mixed connector geometry: one right-angle and one straight SATA plug. This combination suits drives mounted in tight corners where a straight plug would foul adjacent components, while the controller side keeps a conventional straight entry. Hot-swap capability is supported and the assembly is RoHS compliant.
This cable suits builders who need a short, flexible link between a drive in a cramped bay and a motherboard or controller port. It is not for installations that require two straight connectors, two right-angle connectors, or a longer reach than 1 metre. Buyers needing a different connector pairing or extra length should look at other cable configurations.
| Brand | Nippon Labs |
|---|---|
| Model | SATA-1-MINI |
| Type | SATA II |
| Color | Red |
| Length | 3.28 ft. |
| Cable Length | 3.28 ft. (1m) |
| Connector Number | 2 |
| Terminal Gender | Male to Male |
| Features | 2 shielded 26 AWG SATA cable- one right angle to one straight connector Hot-swap capability RoHS Compliant high-speed Serial ATA device to a Serial ATA controller Narrow cables design: 1) simplifies cable routing and installation 2) improves air flow within CPU (no more big ribbons blocking air movement |
| Shipping weight | 0.02 kg |
| Package size | 141 × 88 × 36 mm |
The cable supports the SATA II interface, which caps data transfer at 3 Gbit/s between a Serial ATA device and its controller.
It uses the SATA II standard, limiting the link to 3 Gbit/s even if the drive or controller is capable of a faster SATA revision.
One end has a right-angle plug and the other a straight plug, both male, so the drive and controller must accept standard 7-pin SATA connectors with that orientation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?