We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red SATA cable pair, 0.5 m, right-angle connectors

Nippon Labs

Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair

SKU CH-V0AZ-EWGJF MPN SATA-0.5RR

Two 0.5 m SATA II cables with right-angle connectors support 3.0 Gbps transfers and hot-swap drives

  • TypeSATA II
  • ColorRed
  • Length0.5M (1.64 ft.)
  • Cable Length1.64 ft. (0.50m)
  • Connector Number2
  • Features0.5 Meter (1.64 ft.) 2 shielded 26 AWG SATA II cable- 2 righ
  • Right-angle connectors simplify tight drive-bay routing
  • 5 m length reduces clutter in compact builds
  • Shielded 26 AWG wires support 3.0 Gbps data rates
  • Hot-swap capable for drive changes without power-down
  • Red colour aids quick cable identification

Short cable for tight builds

This 0.5 metre SATA II cable pair uses right-angle connectors on both ends to fit behind drives in cramped cases or backplanes. Shielded 26 AWG conductors support the 3.0 Gbps transfer ceiling of the SATA II standard. The red jacket makes the cable easy to trace during installation.

Builders with restricted clearance

The right-angle ends solve clearance problems where straight plugs would hit side panels or adjacent cards. Hot-swap capability suits removable drive trays and external enclosures. Installers who need longer runs or straight connectors should choose a different cable.

0.5 metre length

At 1.64 ft the cable only reaches devices mounted very close to the motherboard or controller port. Measure the routing path before ordering; a longer cable is required for standard tower layouts.

Highlights

  • Right-angle connectors simplify tight drive-bay routing
  • 5 m length reduces clutter in compact builds
  • Shielded 26 AWG wires support 3.0 Gbps data rates
  • Hot-swap capable for drive changes without power-down
  • Red colour aids quick cable identification

Specifications

BrandNippon Labs
ModelSATA-0.5RR
TypeSATA II
ColorRed
Length0.5M (1.64 ft.)
Cable Length1.64 ft. (0.50m)
Connector Number2
Features0.5 Meter (1.64 ft.) 2 shielded 26 AWG SATA II cable- 2 right angle 7 Pins connectors
3GB Maximum transfer rate
Hot-swap capability
high-speed Serial ATA and Serial ATA II devices to a Serial ATA controller Support data transfer rates of up to 3.0 Gbps.
Narrow cables design:
1) simplifies cable routing and installation
2) improves air flow within CPU (no more big ribbons blocking air movement)
Shipping weight0.02 kg
Package size169 × 90 × 22 mm

Questions about this item

What does the 3.0 Gbps transfer rate mean once the cable is installed?

The cable supports data transfer up to 3.0 Gbps, which is the maximum speed of the SATA II standard it is built to.

Which SATA standard does this cable use and what speed does it cap at?

This is a SATA II cable, so it caps at 3.0 Gbps and works with both SATA and SATA II devices.

What clearance do the right-angle connectors need to fit?

Each end has a right-angle 7-pin connector, letting the cable run parallel to the drive or motherboard for tight spaces.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.