We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten silver SATA cables, each six inches long with one straight and one right-angle connector

Nippon Labs

Nippon Labs S3L0.5-90/180SL-10P SATA cable .5 ft 90/180° 10-pack

SKU CH-QTMX-WC8TB MPN S3L0.5-90/180SL-10P

Ten six-inch SATA III cables with mixed 90-degree and 180-degree latching connectors for tight builds

  • TypeSATA III
  • ColorSilver
  • Length0.5 ft.
  • Cable Length6 in.
  • Connector Number2
  • Connector Detail90 degree to 180 degree

Style 10 Packs

  • 6 Gb/s SATA III speed for fast data transfers
  • Works with 3 Gb/s and 1.5 Gb/s SATA devices
  • 90° to 180° connectors fit tight drive bays
  • Flexible rubber sleeving bends and twists for easy routing
  • Ten cables in one pack for multiple installations

Ten-pack SATA III cables

This ten-pack supplies six-inch SATA III cables with one straight and one right-angle male connector each. They suit builders wiring multiple drives in tight chassis where space is limited. The mixed-angle design lets each cable run flat against a motherboard header or drive backplane.

Rubber-sleeved latching connectors

Each cable uses durable flexible rubber sleeving that tolerates repeated bending and twisting during installation. Latching male ends hold securely on both drive and controller ports while still allowing tool-free removal. The silver colour aids cable identification in dense looms.

Replaces single loose cables

Buyers upgrading from individual loose cables gain consistent length, angle mix and latching reliability across all connections. The jump is worth it when assembling or servicing several drives at once. Not suited for external eSATA runs or internal runs needing longer reach.

Highlights

  • 6 Gb/s SATA III speed for fast data transfers
  • Works with 3 Gb/s and 1.5 Gb/s SATA devices
  • 90° to 180° connectors fit tight drive bays
  • Flexible rubber sleeving bends and twists for easy routing
  • Ten cables in one pack for multiple installations

Specifications

BrandNippon Labs
ModelSATA3L0.5FT-90/180SL-10P
TypeSATA III
ColorSilver
Length0.5 ft.
Cable Length6 in.
Connector Number2
Connector Detail90 degree to 180 degree
Terminal GenderMale to Male
FeaturesSupported SATA 6 Gb/s technology
Backward compatible with 3 Gb/s and 1.5 Gb/s
Durable flexible rubber sleeving can be bent and twisted
The ability to connect and disconnect devices without prior notification
RoHS compliant
Shipping weight0.11 kg
Package size203 × 140 × 70 mm

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What practical speed limit does the SATA III interface on this cable enforce?

The cable supports SATA 6 Gb/s and is backward compatible with 3 Gb/s and 1.5 Gb/s devices, so the link will negotiate to the highest speed both ends support.

What clearance does the 90-degree-to-180-degree connector pair need to fit?

One end exits at a right angle and the other straight, so you need side clearance for the 90° plug and rear clearance for the 180° plug; the cable itself is only .5 ft long.

How do you install the latching connectors without damaging the port?

Align each male connector with the SATA port, push straight in until the metal latch clicks, and pull the release tab — not the cable — when removing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.