We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 8-inch cable with one PCIe 6-pin male connector splitting to two Molex LP4 male connectors

Nippon Labs

Nippon Labs POW-20308 8 in. PCIe 6-pin to dual Molex LP4 internal power cable

SKU CH-3X3R-7PF42 MPN POW-20308

Converts a single PCIe 6-pin connector into two Molex LP4 power leads over an 8-inch cable

  • ColorWhite
  • Length8"
  • Cable Length8 in.
  • Connector A1x PCIe 6pin male
  • Connector B2x Molex LP4 male
  • Connector Number3
  • Connects PCIe graphics cards to dual Molex power sources
  • 8-inch length fits tight case routing
  • White cable colour aids cable management
  • Three male connectors ensure secure internal links
  • Model POW-20308 listed April 30, 2013

PCIe 6-pin to dual Molex LP4 adaptor

This 8-inch cable converts a single PCI Express 6-pin male connector into two Molex LP4 male plugs. It is built for system builders who need to power legacy 5.25-inch drives or accessories from a modern power supply that only offers PCIe leads. The white jacket and male-to-male terminals keep the installation tidy inside the case.

Suited for older optical drives or fan controllers

The adaptor serves anyone adding a DVD burner, legacy hard-disk cage or front-panel controller that still relies on Molex LP4 power. It will not help if the target device uses a different power interface or if the build requires more than two Molex connections from one PCIe source.

8-inch fixed length

At exactly 8 inches the cable reaches nearby drive bays but cannot stretch to distant mounting points in full-tower chassis. Measure the routing path before purchase to confirm the length is adequate.

Highlights

  • Connects PCIe graphics cards to dual Molex power sources
  • 8-inch length fits tight case routing
  • White cable colour aids cable management
  • Three male connectors ensure secure internal links
  • Model POW-20308 listed April 30, 2013

Specifications

BrandNippon Labs
ModelPOW-20308
ColorWhite
Length8"
Cable Length8 in.
Connector A1x PCIe 6pin male
Connector B2x Molex LP4 male
Connector Number3
Connector Detail6-pin PCI Express Male to 5.25" Male x 2
Terminal GenderMale to Male
Shipping weight0.03 kg
Package size147 × 123 × 18 mm

Questions about this item

What PCIe power connector does the POW-20308 use, and how many Molex plugs does it provide?

The cable has one PCIe 6-pin male connector that splits to two Molex LP4 male connectors.

How long is the cable, and what clearance does it need inside the case?

The white cable is 8 in long and needs room for the single 6-pin plug plus two 5.25 in Molex plugs.

How do I connect this adaptor, and which end plugs into the power supply?

Insert the 6-pin male end into the PSU PCIe socket, then attach the two Molex male plugs to your drives; do not force the keyed 6-pin connector.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.