Black Box C6APC28-WH-15 network ethernet cable 28 AWG 14.76 ft 500 MHz White
- Others
- White
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Nippon Labs
A black 4-pin Mini-DIN female coupler snaps into standard keystone wall plates, surface-mount boxes or patch panels to route S-video cable through the home
The Nippon Labs IC-SMD4-BK is a 4-pin Mini-DIN female coupler that snaps into any standard keystone wall plate, surface mount box or patch panel. It provides a clean termination point for S-video cables in home-theatre or legacy AV installations. Installers and DIY enthusiasts use it to route analogue video signals through structured cabling without soldering or crimping. The black finish matches typical keystone hardware for a uniform appearance.
As a purely passive mechanical coupler, the unit generates no heat and draws no electrical power during operation. Signal integrity depends entirely on the quality of the cables plugged into either side, so the device itself adds no noise, latency or voltage drop. There are no active components to fail, making it suitable for permanent in-wall installation where maintenance access is limited. The lightweight construction of .03 lbs places negligible stress on the mounting plate.
The keystone footprint lets the coupler integrate directly into standard wall plates, surface-mount boxes or patch panels alongside data, audio or fibre keystones. No additional brackets, adhesives or tools are required beyond the usual keystone punch-down or snap-in action. This modular approach allows future reconfiguration by simply swapping the insert without rewiring the wall cavity. Buyers needing a non-keystone bulkhead or panel-mount connector will need a different form factor.
| Brand | Nippon Labs |
|---|---|
| Model | IC-SMD4-BK |
| Color | Black |
| Features | This 4-pin Mini-DIN (S-video) female coupler is designed to snap into the standard keystone wall plate, surface mount box or patch panel. It allows you to run home theater cable through the home easily. |
| Dimensions | 3" x 2" x 2" |
| Weight | 0.03 lbs. |
| Shipping weight | 0.01 kg |
| Package size | 109 × 72 × 23 mm |
Align the coupler with the keystone opening and press firmly until the side tabs click into place; the common mistake is stopping before both tabs fully latch.
The passive connector has no moving parts, so only occasional dust removal from the ports is required; replace it if the housing cracks or pins bend.
Signal degradation from the cable length itself becomes the limiting factor before the coupler introduces any measurable loss.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?