We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 15 ft DisplayPort male-to-male cable with gold-plated connectors

Nippon Labs

Nippon Labs DP-15-BR2 15 ft DisplayPort cable 28 AWG 1.2 21.6 Gbps 3840x2160

SKU CH-NZNJ-F74VH MPN DP-15-BR2

A 15 ft DisplayPort 1.2 cable with gold-plated connectors supports 4K at 30bpp and 21.6 Gbps bandwidth

  • TypeDisplayPort Cable
  • ColorBlack
  • Length15 ft.
  • Cable Length15 ft.
  • Connector Number2
  • Connect From1 x DisplayPort

Cable Length 15 Feet

  • Supports 3840×2160 resolution at 30 bpp colour depth
  • 6 Gbps total bandwidth across four main link lanes
  • Gold-plated male connectors resist corrosion for reliable contact
  • Bare copper conductors with foil and braid shielding reduce interference
  • 15 ft length with latch design prevents accidental disconnection

15 ft DisplayPort 1.2 cable

The Nippon Labs DP-15-BR2 is a 15 ft male-to-male DisplayPort cable rated to the 1.2 specification. It carries 4K video at 3840x2160 resolution with 30 bpp colour depth and supports multi-channel audio through a single connection. The cable is intended for users linking a DisplayPort source to a monitor or projector where a longer run is required.

Sustained 21.6 Gbps bandwidth

Four main-link lanes each operate at 5.4 Gbps, delivering a total of 21.6 Gbps maximum throughput. This bandwidth is maintained over the full 15 ft length, so 4K content and stereoscopic 3D signals remain stable without the drop-outs that can appear on lesser cables during extended sessions. The construction targets consistent signal integrity rather than short-burst peaks.

Gold-plated connectors with latch

Bare copper conductors at 28 AWG are wrapped in foil and braid shielding beneath a flexible PVC jacket. Gold-plated DisplayPort plugs resist oxidation and the latch mechanism secures each end against accidental disconnection. The male-to-male layout suits direct device-to-display runs; builders needing a panel-mount or right-angle variant will need a different cable.

Highlights

  • Supports 3840×2160 resolution at 30 bpp colour depth
  • 6 Gbps total bandwidth across four main link lanes
  • Gold-plated male connectors resist corrosion for reliable contact
  • Bare copper conductors with foil and braid shielding reduce interference
  • 15 ft length with latch design prevents accidental disconnection

Specifications

BrandNippon Labs
ModelDP-15-BR2
TypeDisplayPort Cable
ColorBlack
Length15 ft.
Cable Length15 ft.
Connector Number2
Connect From1 x DisplayPort
Connect To1 x DisplayPort
Connector DetailDisplayPort Male to Male w/ Gold Plated
Terminal GenderMale to Male
Wire Gauge28 AWG
SpecificationsDisplayPort Compliant: DisplayPort V1.2
Category: High Bit-rate 2
Main Link Lanes: 4 lanes
Bandwidth: 5.4 Gbps/Lane, total 21.6 Gbps max.
Video Resolution: 3840x2160x30bpp, 4Kx2K
3D Video Support: Stereoscopic 3D
Audio Support: PCM 7.1ch, DTS-HD Master, Dolby TrueHD etc.
Multi-Stream Transport(MST):
Up to 2 at 2560x1440/60Hz, 24bpp
Up to 4 at 1920x1080/60Hz, 24 bpp
AMD Eyefinity: up to 6 displays (depending on graphic card)
Shipping weight0.38 kg
Package size231 × 141 × 55 mm

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 15 ft cable run hot or draw extra power during all-day 4K use?

The passive 28 AWG copper cable carries only the DisplayPort signal, so it generates no measurable heat and adds no power draw beyond what the source and display already supply.

What must my computer and monitor already have for this cable to work?

Both devices need a standard full-size DisplayPort 1.2 port; the cable is male-to-male with gold-plated connectors and latches, so no adapters or external power are required.

Will the 21.6 Gbps link still drive my older 1080p monitor at its native refresh rate?

Yes — the DisplayPort 1.2 connection is fully backward compatible and will negotiate the highest resolution and refresh rate the older display supports.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.