We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 7-foot Cat6 UTP ethernet cable with gold-plated RJ45 connectors and molded boots

Nippon Labs

Nippon Labs CAT6MB-7BK 7 ft Cat6 UTP network ethernet cable Black

SKU CH-TYQT-KTSMD MPN CAT6MB-7BK

A 7 ft Cat6 UTP patch cable with gold-plated RJ45 connectors rated for 550 MHz bandwidth

  • TypeCat6 UTP (Unshielded Twist Pair) Solid
  • Cat6
  • Connector A50 micron gold-plated RJ45
  • Length7 ft.
  • ColorBlack
  • ShieldedNo
  • 550 MHz bandwidth supports 10 Gigabit Ethernet speeds
  • Gold-plated RJ45 connectors ensure reliable signal transmission
  • Pair separator reduces crosstalk for a clean signal
  • Flexible PVC jacket simplifies routing in tight spaces
  • Meets TIA/EIA Cat 6 standards for certified performance

Wired connectivity for home and office networks

This Cat6 UTP patch cable links computers, routers, switches, NAS devices, VoIP phones and PoE endpoints on a Gigabit LAN. Flexible PVC jacket and injection-moulded boots protect the 24 AWG stranded copper conductors. Pair separator and bare copper reduce crosstalk for a clean signal across the 7 ft run.

Practical limits of Cat6 UTP at 550 MHz

The unshielded design meets TIA/EIA-568-B-2.1 draft 9 and 568-C.2 standards for 550 MHz bandwidth. UTP construction means no external foil or braid, so electromagnetic immunity relies on twist geometry alone. Maximum certified channel length remains 100 m; this 7 ft segment fits well within that limit for 1000 BASE-T, 100 BASE-T and 10 BASE-T.

Gold-plated RJ45 contacts decide long-term

Connectors use 50 micron gold plating to resist oxidation and maintain low contact resistance over repeated insertions. Solid copper pins mate with standard keystone jacks and switch ports without signal degradation. If the installation demands shielded cable or a different length, this part will not match that requirement.

Highlights

  • 550 MHz bandwidth supports 10 Gigabit Ethernet speeds
  • Gold-plated RJ45 connectors ensure reliable signal transmission
  • Pair separator reduces crosstalk for a clean signal
  • Flexible PVC jacket simplifies routing in tight spaces
  • Meets TIA/EIA Cat 6 standards for certified performance

Specifications

BrandNippon Labs
ModelCAT6MB-7BK
TypeCat6 UTP (Unshielded Twist Pair) Solid
Cat6
Connector A50 micron gold-plated RJ45
Length7 ft.
ColorBlack
ShieldedNo
FeaturesProvides hi-speed data transfer rate up to 550MHz.
Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire.
Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.
Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.
Shipping weight0.09 kg
Package size213 × 161 × 23 mm

Questions about this item

Should I pick the 7 ft black cable or a different length for my desk-to-router run?

This model is only offered in a 7 ft length with a black PVC jacket. If your router sits farther away, measure the path and add slack for bends; otherwise the 7 ft span fits most desk-to-router or patch-panel-to-switch links.

What does the 550 MHz rating actually deliver when the cable is plugged into my gigabit switch?

The 550 MHz bandwidth headroom lets the four 24 AWG stranded pairs carry 1000 BASE-T, 100 BASE-T and 10 BASE-T with lower crosstalk and return loss than basic 100 MHz wire, so gigabit speeds stay stable over the full 7 ft.

Are the RJ45 plugs standard TIA/EIA 568 pinout and will they snap into any gigabit port?

Yes, each end uses a 50 micron gold-plated RJ45 wired to TIA/EIA 568-C.2, so the cable mates with every 10/100/1000 BASE-T port on PCs, routers, switches, NAS, VoIP phones and PoE devices.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.