We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray 25 ft Cat6 UTP ethernet cable with gold RJ45 connectors

Nippon Labs

Nippon Labs CAT6MB-25GY 25 ft Cat6 UTP network ethernet cable Gray

SKU CH-YEAJ-D9V42 MPN CAT6MB-25GY

25 ft Cat6 UTP patch cable with gold-plated RJ45 connectors rated for 550 MHz bandwidth and 10 Gigabit Ethernet support

  • TypeCat6 UTP (Unshielded Twist Pair) Solid
  • Cat6
  • Connector A50 micron gold-plated RJ45
  • Length25 ft.
  • ColorGray
  • ShieldedNo
  • 550 MHz bandwidth supports high-speed Gigabit Ethernet
  • 50-micron gold-plated RJ45 resists corrosion for reliable contact
  • Injection-moulded boots protect connectors from snag damage
  • 24 AWG stranded copper with pair separator cuts crosstalk
  • 25 ft grey PVC jacket reaches across rooms cleanly

25 ft Cat6 UTP patch cable for wired networks

This 25 ft Cat6 unshielded twisted-pair cable connects computers, routers, switches, printers, NAS units, VoIP phones and PoE devices on a Gigabit LAN. It uses 24 AWG stranded copper conductors with a pair separator to reduce crosstalk. The flexible PVC jacket and injection-moulded boots protect the 50 micron gold-plated RJ45 plugs during routine handling.

Sustained signal quality over 550 MHz bandwidth

The cable is rated for 550 MHz, supporting 10 Gigabit Ethernet as well as 1000 BASE-T, 100 BASE-T and 10 BASE-T without the signal degradation seen on lower-rated wire. Pair separation and bare copper conductors keep crosstalk low during continuous high-throughput transfers such as large file moves or PoE-powered device operation. It meets TIA/EIA 568-C.2 and 568-B-2.1 draft 9 standards for consistent performance.

Length and category define the practical limit

At 25 ft the run stays well within the 100 m maximum for Cat6 horizontal links, so 10 Gbps operation is viable without repeaters. The unshielded design means the cable is not suited for environments with strong electromagnetic interference where shielded or fibre alternatives would be required. PoE heating is mitigated by the conductor geometry, but total bundle size and ambient temperature still govern safe power delivery.

Highlights

  • 550 MHz bandwidth supports high-speed Gigabit Ethernet
  • 50-micron gold-plated RJ45 resists corrosion for reliable contact
  • Injection-moulded boots protect connectors from snag damage
  • 24 AWG stranded copper with pair separator cuts crosstalk
  • 25 ft grey PVC jacket reaches across rooms cleanly

Specifications

BrandNippon Labs
ModelCAT6MB-25GY
TypeCat6 UTP (Unshielded Twist Pair) Solid
Cat6
Connector A50 micron gold-plated RJ45
Length25 ft.
ColorGray
ShieldedNo
FeaturesProvides hi-speed data transfer rate up to 550MHz.
Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire.
Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.
Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.
Shipping weight0.30 kg
Package size201 × 177 × 23 mm

Questions about this item

Does the 24 AWG stranded copper and 550 MHz rating keep the cable cool during all-day PoE use?

The 24 AWG stranded copper conductors and 550 MHz design improve heat dissipation so the cable stays cooler during continuous PoE loads.

What devices must I already own to use the RJ45 connectors on this 25 ft Cat6 patch cable?

You need equipment with standard RJ45 ports such as a router, switch, PC, NAS, printer, VoIP phone or PoE device.

Will this Cat6 UTP cable work with my older 100 BASE-T and 10 BASE-T hardware?

Yes, the cable supports Gigabit 1000 BASE-T, 100 BASE-T and 10 BASE-T so it works with legacy Fast Ethernet and 10 Mbps gear.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.