Nippon Labs
Nippon Labs CAT6MB-100BK 100 ft network ethernet cable
100 ft Cat6 UTP patch cable with gold-plated RJ45 connectors rated for 550 MHz bandwidth
- TypeCat6 UTP (Unshielded Twist Pair) Solid
- Cat6
- Connector A50 micron gold-plated RJ45
- Length100 ft.
- ColorBlack
- ShieldedNo
- Supports 10 Gigabit Ethernet at 550 MHz bandwidth
- Gold-plated RJ45 connectors resist corrosion for reliable contact
- Stranded 24 AWG copper with pair separator cuts crosstalk
- Flexible PVC jacket eases routing in tight spaces
- Meets TIA/EIA 568-C.2 Cat 6 standard for certified performance
Cat6 UTP cable for wired networks
This 100 ft Cat6 UTP patch cable connects computers, routers, switches, printers, NAS devices, VoIP phones and PoE equipment on a Gigabit LAN. It uses 24 AWG stranded copper conductors with a pair separator to reduce crosstalk. The flexible PVC jacket makes it practical for home and office installations.
Limits of the Cat6 550 MHz standard
The cable supports data rates up to 550 MHz and carries 10 Gigabit Ethernet, 1000 BASE-T, 100 BASE-T and 10 BASE-T signals. It meets TIA/EIA-568-B-2.1 draft 9 and TIA/EIA 568-C.2 standards. Unshielded construction means it is not intended for environments with heavy electromagnetic interference.
100 ft length decides the reach
At 100 ft the cable spans typical room-to-room or desk-to-rack distances without needing extra couplers. Gold-plated RJ45 connectors with 50 micron plating resist corrosion over repeated insertions. Buyers who need longer runs or shielded cable for noisy industrial settings should look elsewhere.
Highlights
- Supports 10 Gigabit Ethernet at 550 MHz bandwidth
- Gold-plated RJ45 connectors resist corrosion for reliable contact
- Stranded 24 AWG copper with pair separator cuts crosstalk
- Flexible PVC jacket eases routing in tight spaces
- Meets TIA/EIA 568-C.2 Cat 6 standard for certified performance
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | CAT6MB-100BK |
| Type | Cat6 UTP (Unshielded Twist Pair) Solid |
| Cat | 6 |
| Connector A | 50 micron gold-plated RJ45 |
| Length | 100 ft. |
| Color | Black |
| Shielded | No |
| Features | Provides hi-speed data transfer rate up to 550MHz. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. |
| Shipping weight | 1.24 kg |
| Package size | 265 × 226 × 75 mm |
Questions about this item
Should I choose the 100 ft black Cat6 cable or a different length for my office run?
The 100 ft black Cat6 UTP cable with 24 AWG stranded copper and 50 micron gold-plated RJ45 connectors suits runs up to that distance; pick a shorter length only if the path is measurably less.
What does the 550 MHz rating deliver on a real Gigabit LAN?
The 550 MHz bandwidth supports 10 Gigabit Ethernet speeds over the 100 ft run while meeting TIA/EIA 568-C.2, so Gigabit 1000 BASE-T, 100 BASE-T and 10 BASE-T all operate at full rate.
How does the RJ45 interface and Cat6 standard limit PoE use?
Gold-plated RJ45 contacts and bare copper conductors handle PoE devices within the Cat6 550 MHz spec; the unshielded 24 AWG pairs dissipate heat adequately for standard PoE loads.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box C6PC28-BK-05 Slim-Net Cat6 Patch Cable 5 ft
$5.99
0.00007003BTC
In stock
Axiom
Axiom WG8583-AX SFP+ Transceiver 10GBASE-SR 850nm 984ft Firebox M440
- Consumer Electronics
$164.99
0.00192885BTC
In stock