We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black bulk Cat 6 UTP cable on a 1000 ft pull box, solid 23 AWG copper conductors, CMR riser rated, matte black PVC jacket

Nippon Labs

Nippon Labs C6U-5383RK Cat 6 network ethernet cable 1000 ft 23 AWG UTP black

SKU CH-XSTJ-THDTA MPN C6U-5383RK

A 1000 ft Cat 6 UTP bulk cable with 23 AWG solid copper conductors, CMR riser rating and 600 MHz tested performance for indoor LAN runs

  • TypeNetwork Ethernet Cables
  • Cat6
  • Length1000 ft.
  • ColorBlack
  • ShieldedUTP
  • Wire Gauge23 AWG
  • Cat 6 rating supports 600 MHz bandwidth for high-speed data
  • 1000 ft pull box enables long indoor runs without splices
  • CMR riser rating approved for in-wall and vertical installations
  • 23 AWG solid copper conductors meet TIA 568 C.2 performance standards
  • UL listed and RoHS compliant for safety and environmental assurance

Nippon Labs Cat 6 riser cable

Nippon Labs C6U-5383RK is a 1000 ft Cat 6 UTP bulk cable rated CMR for indoor riser runs. Solid 23 AWG bare copper conductors with HDPE insulation and a CMR-UL PVC jacket are supplied in a pull box. The cable is UL listed, c(UL)us verified and RoHS compliant. It meets or exceeds TIA 568 C.2 Category 6 requirements.

Suited for installers pulling permanent indoor links

This cable fits projects that need a verified Cat 6 riser run through walls, between floors or in other non-plenum spaces. Buyers who need plenum-rated jacket material for air-handling areas should look at something else. It is not intended for patch-cord assemblies or outdoor burial. The solid conductors are made for punch-down termination, not for repeated flexing.

Tested to 600 MHz bandwidth

The single specification that decides fit is the 600 MHz sweep-test limit printed on the jacket and confirmed by third-party verification. If the installation spec calls for a higher frequency margin, this cable will not meet it. If 600 MHz satisfies the design, the CMR rating and UL listing make it compliant for standard indoor riser pathways.

Highlights

  • Cat 6 rating supports 600 MHz bandwidth for high-speed data
  • 1000 ft pull box enables long indoor runs without splices
  • CMR riser rating approved for in-wall and vertical installations
  • 23 AWG solid copper conductors meet TIA 568 C.2 performance standards
  • UL listed and RoHS compliant for safety and environmental assurance

Specifications

BrandNippon Labs
ModelC6U-5383RK
TypeNetwork Ethernet Cables
Cat6
Length1000 ft.
ColorBlack
ShieldedUTP
Wire Gauge23 AWG
Shipping weight13.61 kg
Package size381 × 381 × 254 mm

Questions about this item

Will the solid 23 AWG copper conductors ever need replacement inside walls?

Solid copper conductors in a riser-rated cable are designed for permanent installation; they do not wear out and only require replacement if physically damaged during or after installation.

What is the highest frequency the cable is tested to handle before performance drops?

The cable is tested to perform up to 600 MHz, so sustained signals above that frequency would be the first limit encountered.

Does the CMR PVC jacket add noticeable heat or power draw when the cable runs all day?

The cable carries only data signals and draws no power itself; the CMR-rated PVC jacket does not generate heat during normal operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.