We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray bulk Cat 6 Ethernet cable in pull box, 1000 ft, 23 AWG solid copper UTP

Nippon Labs

Nippon Labs C6U-5017RG Cat 6 network ethernet cable 1000 ft 23 AWG UTP Gray

SKU CH-KRV1-7T36R MPN C6U-5017RG

Cat 6 UTP bulk cable rated for 600 MHz, 1000 ft pull box with 23 AWG solid copper conductors for indoor riser runs

  • TypeNetwork Ethernet Cables
  • Cat6
  • Length1000 ft.
  • ColorGray
  • ShieldedUTP
  • Wire Gauge23 AWG
  • Cat 6 rating supports 600 MHz performance
  • 1000 ft pull box simplifies long indoor runs
  • 23 AWG solid copper conductors ensure signal integrity
  • CMR UL Listed jacket meets riser safety requirements
  • TIA 568 C.2 compliance guarantees Category 6 standards

Nippon Labs Cat 6 1000 ft bulk cable

This Nippon Labs Cat 6 bulk Ethernet cable arrives as a 1000 ft pull box of 23 AWG solid copper UTP wire. It is built for installers and IT teams who need long indoor runs for voice, data, video and security networks. The CMR riser rating and UL listing make it suitable for in-wall and between-floor installations in non-plenum spaces.

Riser-rated Cat 6 bandwidth ceiling

The cable is tested to 600 MHz and meets TIA 568 C.2 Category 6 specifications. That bandwidth ceiling defines the practical limit for Gigabit Ethernet and 10GBASE-T over the full 1000 ft length. Because it is unshielded UTP, performance in high-EMI environments may fall below the rated ceiling, and plenum spaces require a different jacket rating not provided here.

Pull-box installation and common snags

The 1000 ft pull box feeds smoothly for long pulls through studs and conduit, and the solid 23 AWG conductors hold punch-down terminations reliably. Installers must keep bend radius gentle to avoid kinking the solid cores, and the gray CMR jacket cannot be used in plenum air spaces. No connectors or patch-panel hardware are included in the box.

Highlights

  • Cat 6 rating supports 600 MHz performance
  • 1000 ft pull box simplifies long indoor runs
  • 23 AWG solid copper conductors ensure signal integrity
  • CMR UL Listed jacket meets riser safety requirements
  • TIA 568 C.2 compliance guarantees Category 6 standards

Specifications

BrandNippon Labs
ModelC6U-5017RG
TypeNetwork Ethernet Cables
Cat6
Length1000 ft.
ColorGray
ShieldedUTP
Wire Gauge23 AWG
Shipping weight13.61 kg
Package size381 × 381 × 254 mm

Questions about this item

Should I choose this 1000 ft pull box or a shorter length for my installation?

The 1000 ft pull box suits whole-building runs where you cut custom lengths on site; choose a shorter pre-cut cable only if you need a single drop under 1000 ft.

What does the 600 MHz rating mean for actual network speed in my rack?

The cable is tested to 600 MHz, giving margin above the Cat 6 requirement and supporting gigabit Ethernet and 10GBASE-T up to the distance limits of the standard.

How does the CMR riser rating limit where I can run this UTP cable?

CMR rating allows vertical runs between floors in non-plenum spaces; it is not rated for plenum air-handling areas.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.