Nippon Labs 60CAT8-7-30OR network ethernet cable 7 ft Cat 8 orange 30AWG 2000 MHz 40 Gbps

Cat 8 cable for 25 GbE and 40 GbE links

This 7 ft Cat 8 patch cord is rated for 2 GHz bandwidth and up to 40 Gbps data rates, making it suitable for emerging 25GBASE-T and 40GBASE-T networks. The 30 AWG stranded copper conductors keep the cable slim for routing in tight spaces. Fully shielded U/FTP construction with foil around each pair reduces alien crosstalk. Gold-plated RJ45 contacts (50 µm) and T568B wiring complete the link.

Suitable for high-density racks

Builders who need a thin, flexible cable for dense patch panels or short switch-to-server runs will benefit from the reduced diameter. Installations that require solid-conductor cable for longer horizontal runs or PoE budgets beyond what 30 AWG can carry should select a different gauge. The CM-rated PVC jacket covers general indoor use but is not rated for plenum spaces.

Shielded pairs maintain signal integrity under load

Each of the four twisted pairs is individually foil-shielded, limiting crosstalk when the link runs at sustained 2000 MHz. The stranded conductors and snagless boots survive repeated re-seating without degrading contact resistance. Oxygen-free copper keeps insertion loss low during continuous 40 Gbps throughput. The molded strain relief prevents sharp bends that would otherwise raise return loss over time.