We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Cat8 ethernet cable with RJ45 connectors, 50 ft length

Nippon Labs

Nippon Labs 60CAT8-50-24BU network ethernet cable Cat8 50 ft 24 AWG 2000 MHz 40 Gbps

SKU CH-FBEX-2V7R6 MPN 60CAT8-50-24BU

A 50 ft Cat8 patch cable with S/FTP shielding, 24 AWG conductors and 2000 MHz bandwidth for 40 Gbps networking

  • TypeNetwork Ethernet Cables
  • Cat8
  • Connector ARJ45
  • Connector BRJ45
  • Length50 ft.
  • ColorBlue
  • Supports 40 Gbps speeds with 2000 MHz bandwidth
  • Backward compatible with Cat5 through Cat7 equipment
  • UL rated for 25GBASE-T and 40GBASE-T applications
  • Pure copper conductors with foil and braid shielding
  • Snagless gold-plated connectors with molded strain relief

Cat8 shielded Ethernet cable for 40 Gbps links

This Nippon Labs cable uses Category 8 construction with S/FTP shielding and 24 AWG conductors to deliver up to 40 Gbps over a 50 ft run. It operates at 2000 MHz bandwidth and is rated for 25GBASE-T and 40GBASE-T applications. The blue PVC jacket is CM rated for indoor or outdoor installation. Gold-plated RJ45 connectors on both ends ensure reliable contact.

Thermals noise and power draw in normal use

As a passive copper cable it generates no heat and draws no power of its own. The double shielding — foil around each pair plus an overall braid — suppresses alien crosstalk and electromagnetic interference without active components. Signal integrity is maintained across the full 50 ft length at the rated 2000 MHz frequency. No fan noise or thermal management is ever required.

What the bundled accessories

No software or accessories are included in the package. The cable itself provides molded strain-relief boots and snagless push-tabs that protect the connector latch during repeated insertion. The 50 µm gold plating resists oxidation for long-term conductivity. These physical features reduce connection failures in patch-panel, router, console or server deployments.

Highlights

  • Supports 40 Gbps speeds with 2000 MHz bandwidth
  • Backward compatible with Cat5 through Cat7 equipment
  • UL rated for 25GBASE-T and 40GBASE-T applications
  • Pure copper conductors with foil and braid shielding
  • Snagless gold-plated connectors with molded strain relief

Specifications

BrandNippon Labs
Model60CAT8-50-24BU
TypeNetwork Ethernet Cables
Cat8
Connector ARJ45
Connector BRJ45
Length50 ft.
ColorBlue
ShieldedEach pair Foil shielded / 4 Pair Braid Shield
Wire Gauge24 AWG
FeaturesOperates at a frequency of 2 GHz (2000 MHz), which enables higher bandwidth and requires shielding and is regarded as a new option for emerging 25gbase-t and 40gbase-t networks.
Fully backward compatible with all the previous (cat5, cat5e, cat6, cat6a and cat7) RJ45 cabling and equipment.
UL rated CAT 8 cable is designed to support 25gbase-t and 40gbase-t applications, It is suitable for small or middle Enterprise LANs, especially for data center switch-to-server interconnections.
Perfect for servers, TV, TV Box, laptop, PC, printer, networking switch, routers, ADSL, adapters, hubs,
Shipping weight0.93 kg
Package size375 × 286 × 51 mm

Questions about this item

How do I install the 50 ft Cat8 cable and what step is often missed?

Route the blue PVC jacketed cable between devices, press each gold-plated RJ45 plug until the soft flex tab clicks, and verify the link negotiates at 2000 MHz — the snagless boot can hide a partial seat.

What maintenance or replacement will this S/FTP cable need later?

Inspect the foil and braid shields for kinks after any remodel, reseat the 50 µm gold contacts if corrosion appears, and replace the run if 40 Gbps throughput drops below 25 GBASE-T expectations.

What limit appears first under sustained 40 Gbps loads on this 24 AWG copper run?

The 50 ft length stays inside the Cat8 channel allowance, so the practical ceiling is the 2000 MHz bandwidth rating of the shielded pairs rather than distance attenuation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.