We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Nippon Labs

Nippon Labs 60CAT8-5-30WT 5 ft Cat8 network ethernet cable

SKU CH-DJJ0-WQSZH MPN 60CAT8-5-30WT

A 5 ft Cat8 patch cord with 30 AWG stranded copper conductors, foil-shielded pairs and gold-plated RJ45 plugs rated for 2000 MHz and 40 Gbps

  • TypeNetwork Ethernet Cables
  • Cat8
  • Connector ARJ45
  • Connector BRJ45
  • Length5 ft.
  • ColorWhite
  • Supports 40Gbps data rates for high-speed networks
  • 2000 MHz bandwidth enables 25GBASE-T and 40GBASE-T
  • Each pair foil shielded reduces external interference
  • 50 micron gold-plated contacts resist corrosion
  • Slim 30 AWG stranded copper allows flexible routing

5 ft Cat8 cable for 40 Gbps networks

This 5 ft Cat8 patch cord is built for 40 Gbps data rates and 2 GHz bandwidth. It serves workstations, servers and switches that demand the highest copper performance available today. The RJ45 connectors fit standard Ethernet ports without adapters.

Shielded pairs sustain 2 GHz bandwidth

Each of the four twisted pairs is wrapped in aluminium foil, giving U/FTP shielding that suppresses alien crosstalk at 2000 MHz. Oxygen-free copper conductors keep resistance low so signal integrity holds over the full length during sustained 25 Gbps or 40 Gbps streams.

Slim 30 AWG jacket eases routing

The 30 AWG stranded conductors make the cable noticeably thinner and more flexible than typical Cat8, allowing tight bends behind racks or along baseboards. Gold-plated contacts rated at 50 µm resist corrosion, while the snagless boot and moulded strain relief protect the latch during repeated unplugging.

Highlights

  • Supports 40Gbps data rates for high-speed networks
  • 2000 MHz bandwidth enables 25GBASE-T and 40GBASE-T
  • Each pair foil shielded reduces external interference
  • 50 micron gold-plated contacts resist corrosion
  • Slim 30 AWG stranded copper allows flexible routing

Specifications

BrandNippon Labs
Model60CAT8-5-30WT
TypeNetwork Ethernet Cables
Cat8
Connector ARJ45
Connector BRJ45
Length5 ft.
ColorWhite
Wire Gauge30 AWG
FeaturesOperates at a frequency of 2 GHz (2000 MHz), which enables higher bandwidth and requires shielding and is regarded as a new option for emerging 25gbase-t and 40gbase-t networks.
Fully backward compatible with all the previous (cat5, cat5e, cat6, cat6a and cat7) RJ45 cabling and equipment.
UL rated CAT 8 cable is designed to support 25gbase-t and 40gbase-t applications, It is suitable for small or middle Enterprise LANs, especially for data center switch-to-server interconnections.
Perfect for servers, TV, TV Box, laptop, PC, printer, networking switch, routers, ADSL, adapters, hubs,
Shipping weight0.12 kg
Package size178 × 165 × 25 mm

Questions about this item

Does the 30 AWG stranded copper construction affect heat or power loss on a 5 ft run at 40 Gbps?

The 30 AWG stranded pure copper conductors keep resistance low on this 5 ft cable, so heat and power loss remain negligible even at 40 Gbps.

What ports must my devices already have to use the RJ45 connectors on this cable?

Both devices need standard RJ45 Ethernet ports; the cable’s RJ45 plugs with 50 micron gold-plated contacts mate directly with any RJ45 jack.

Will this Cat8 cable work with my existing Cat5e and Cat6a patch panels and switches?

Yes, the cable is fully backwards compatible with Cat5e, Cat6 and Cat6a hardware, so it plugs into older panels and switches without any configuration.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.