Nippon Labs
Nippon Labs 60CAT8-5-26GY Cat8 network ethernet cable 5 ft 26 AWG shielded gray
A 5 ft shielded Cat8 patch cable with 26 AWG conductors rated for 40 Gbps at 2000 MHz, backward compatible with earlier categories
- TypeNetwork Ethernet Cables
- Cat8
- Connector ARJ45
- Connector BRJ45
- Length5 ft.
- ColorGray
- Supports up to 40 Gbps data rates for demanding networks
- 2000 MHz bandwidth handles emerging 25GBASE-T and 40GBASE-T standards
- S/FTP shielding with foil per pair and overall braid blocks interference
- 50 µm gold-plated RJ45 contacts resist corrosion and ensure reliable connections
- 26 AWG stranded pure copper conductors provide flexibility and low resistance
Nippon Labs Cat8 5 ft shielded cable
This 5 ft Cat8 patch cable uses 26 AWG stranded pure copper conductors with S/FTP shielding and gold-plated RJ45 connectors. It is rated for 2 000 MHz bandwidth and up to 40 Gbps data rates. The PVC jacket suits indoor and outdoor runs. Backward compatibility covers Cat5e, Cat6, Cat6A and Cat7 equipment.
Who should use this Cat8 lead
Builders wiring 25 Gbps or 40 Gbps links over short copper runs will use the full 2 GHz bandwidth. Installers needing shielded, weather-resistant cable for in-wall or outdoor routing gain the double foil and braid protection. Buyers whose network tops out at 1 Gbps will not see a speed increase from the higher specification.
Deciding spec: 2 000 MHz bandwidth
The 2 GHz (2 000 MHz) frequency rating is the single figure that determines whether this cable matches the port speed you plan to run. If your switch or NIC negotiates 25GBASE-T or 40GBASE-T, the cable meets the channel requirement. For slower ports the extra headroom remains unused.
Highlights
- Supports up to 40 Gbps data rates for demanding networks
- 2000 MHz bandwidth handles emerging 25GBASE-T and 40GBASE-T standards
- S/FTP shielding with foil per pair and overall braid blocks interference
- 50 µm gold-plated RJ45 contacts resist corrosion and ensure reliable connections
- 26 AWG stranded pure copper conductors provide flexibility and low resistance
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 60CAT8-5-26GY |
| Type | Network Ethernet Cables |
| Cat | 8 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 5 ft. |
| Color | Gray |
| Shielded | Yes |
| Wire Gauge | 26 AWG |
| Features | Operates at a frequency of 2 GHz (2000 MHz), which enables higher bandwidth and requires shielding and is regarded as a new option for emerging 25gbase-t and 40gbase-t networks. Fully backward compatible with all the previous (cat5, cat5e, cat6, cat6a and cat7) RJ45 cabling and equipment. UL rated CAT 8 cable is designed to support 25gbase-t and 40gbase-t applications, It is suitable for small or middle Enterprise LANs, especially for data center switch-to-server interconnections. Ideal for any device with an RJ45 port, including networking switches, IP Cam, routers, Nintendo switch, |
| Shipping weight | 0.07 kg |
| Package size | 177 × 169 × 46 mm |
Questions about this item
Will this Cat8 cable work with my existing Cat5e and Cat6 patch panels and switches?
Yes, the cable is fully backward compatible with Cat5e, Cat6, Cat6A and Cat7 equipment, so it will connect to your current patch panels and switches without any issues.
How can I verify the cable is delivering its rated 2000 MHz bandwidth after installation?
Use a qualified cable certifier or network tester that measures frequency response up to 2 GHz; a passing Category 8 channel test confirms the 2000 MHz performance.
Does the 5 ft cable include the RJ45 connectors, or do I need to buy them separately?
The cable arrives terminated with RJ45 plugs on both ends, featuring 50 micron gold plated contacts and metal shielded housings, so no separate connectors are required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



