Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Nippon Labs
Category 8 shielded patch cable rated for 40 Gbps at 2000 MHz with gold-plated RJ45 connectors
This Nippon Labs Cat8 patch cable uses 26 AWG stranded pure copper conductors and S/FTP shielding to deliver up to 40 Gbps at 2000 MHz. The five-foot black cable terminates in RJ45 plugs with 50 µm gold-plated contacts and a snagless, strain-relief boot. It is rated for in-wall and outdoor use with a PVC jacket.
Each of the four twisted pairs is individually foil-shielded and wrapped in an overall braid, suppressing alien crosstalk during continuous high-frequency transmission. The 2 GHz bandwidth headroom supports emerging 25GBASE-T and 40GBASE-T links without the signal degradation seen on lower-category cables under prolonged load.
The cable is fully backward compatible with existing Cat5e, Cat6, Cat6A and Cat7 infrastructure, so it drops into current router, switch, modem or PC ports. The jump is worthwhile when deploying 25 Gbps or 40 Gbps copper links or when shielding is required for noisy environments.
| Brand | Nippon Labs |
|---|---|
| Model | 60CAT8-5-26BK |
| Type | Network Ethernet Cables |
| Cat | 8 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 5 ft. |
| Color | Black |
| Shielded | Yes |
| Wire Gauge | 26 AWG |
| Features | Operates at a frequency of 2 GHz (2000 MHz), which enables higher bandwidth and requires shielding and is regarded as a new option for emerging 25gbase-t and 40gbase-t networks. Fully backward compatible with all the previous (cat5, cat5e, cat6, cat6a and cat7) RJ45 cabling and equipment. UL rated CAT 8 cable is designed to support 25gbase-t and 40gbase-t applications, It is suitable for small or middle Enterprise LANs, especially for data center switch-to-server interconnections. Ideal for any device with an RJ45 port, including networking switches, IP Cam, routers, Nintendo switch, |
| Shipping weight | 0.07 kg |
| Package size | 175 × 166 × 29 mm |
No, the 2000 MHz rating is a bandwidth specification, not a power draw. The 26 AWG copper conductors carry only the signal, so the cable adds no heat or power load to your setup.
Any equipment with a standard RJ45 port — router, modem, switch, PC, NAS or game console — will connect directly. The cable is fully backward compatible with Cat5e, Cat6, Cat6a and Cat7 hardware.
Yes. The cable is backward compatible with Cat6a, Cat6, Cat5e and Cat7 infrastructure, so it will link at the highest speed both ends support without any configuration.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?