Nippon Labs 60CAT8-35-24GN network ethernet cable 35 ft Cat8 24 AWG green

Nippon Labs Cat8 35 ft Ethernet cable

This 35 ft Cat8 patch cable uses 24 AWG stranded copper conductors with S/FTP shielding and gold-plated RJ45 connectors on both ends. It is rated for 2000 MHz bandwidth and supports 25GBASE-T and 40GBASE-T applications up to 40 Gbps. The green PVC jacket is CM rated for indoor use and also weatherproof for outdoor runs. It suits home, office and data-centre links where high frequency performance is required.

Check connector spacing

The RJ45 plugs feature a soft flex push tab and molded strain relief, so verify that the latch can be reached on your switch, router, console or NAS ports without obstruction. Ensure the 35 ft length matches the path between devices; excess slack should be managed to avoid tension on the connectors. The shielded design requires both ends to be plugged into grounded equipment for the screen to function as intended.

Build quality and daily handling

The cable combines individual foil shielding, an overall steel braid and a durable PVC outer jacket to resist EMI and physical wear. Gold-plated contacts at 50 µm resist corrosion over repeated insertions. Snagless boots and molded strain relief prevent the latch from catching on adjacent cables during moves or rack changes. The construction supports PoE and PoE+ power delivery alongside data, making it practical for IP cameras, access points and other powered network devices.