We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Cat8 ethernet cable, 3 ft, RJ45 connectors, shielded, PVC jacket

Nippon Labs

Nippon Labs 60CAT8-3-26WT Cat8 network ethernet cable 3 ft white 26AWG 2000MHz 40Gbps

SKU CH-T71P-QSN82 MPN 60CAT8-3-26WT

Cat8 shielded patch cable delivering 40 Gbps at 2000 MHz over 3 ft with 26 AWG conductors and gold-plated RJ45 connectors

  • TypeNetwork Ethernet Cables
  • Cat8
  • Connector ARJ45
  • Connector BRJ45
  • Length3 ft.
  • ColorWhite
  • Supports 40 Gbps speeds for demanding 25GBASE-T and 40GBASE-T networks
  • 2000 MHz bandwidth enables high-frequency data transmission with reduced latency
  • S/FTP shielding with foil-wrapped pairs and overall braid blocks external interference
  • 50 µm gold-plated RJ45 contacts resist corrosion for reliable long-term connectivity
  • 26 AWG stranded pure copper conductors provide flexibility and low signal loss

Nippon Labs Cat8 3 ft cable

The Nippon Labs 60CAT8-3-26WT is a Category 8 patch cable built for 40 Gbps data rates and 2000 MHz bandwidth. It uses 26 AWG stranded pure copper conductors with S/FTP shielding and gold-plated RJ45 connectors. The white PVC jacket is rated for indoor and outdoor use. It targets users who need maximum copper performance for short runs.

Check connector clearance and device ports

Verify that your router, switch, modem or PC has standard RJ45 jacks with enough space for the molded strain-relief boots. The cable is fully backward compatible with Cat5e, Cat6, Cat6a and Cat7 equipment, so existing hardware will work. Ensure the 3 ft length reaches between your devices without tension. Outdoor runs should be protected from sharp edges and prolonged UV exposure.

Suits high-speed LANs and short server links

This cable suits home gamers, small-office networks and rack-to-rack links that demand 25 or 40 Gbps over copper. It is not for buyers who need longer runs beyond the Cat8 channel limit, installers who require plenum-rated jackets, or anyone pulling cable through tight conduit where a thinner unshielded cable would be easier.

Highlights

  • Supports 40 Gbps speeds for demanding 25GBASE-T and 40GBASE-T networks
  • 2000 MHz bandwidth enables high-frequency data transmission with reduced latency
  • S/FTP shielding with foil-wrapped pairs and overall braid blocks external interference
  • 50 µm gold-plated RJ45 contacts resist corrosion for reliable long-term connectivity
  • 26 AWG stranded pure copper conductors provide flexibility and low signal loss

Specifications

BrandNippon Labs
Model60CAT8-3-26WT
TypeNetwork Ethernet Cables
Cat8
Connector ARJ45
Connector BRJ45
Length3 ft.
ColorWhite
ShieldedYes
Wire Gauge26 AWG
FeaturesOperates at a frequency of 2 GHz (2000 MHz), which enables higher bandwidth and requires shielding and is regarded as a new option for emerging 25gbase-t and 40gbase-t networks.
Fully backward compatible with all the previous (cat5, cat5e, cat6, cat6a and cat7) RJ45 cabling and equipment.
UL rated CAT 8 cable is designed to support 25gbase-t and 40gbase-t applications, It is suitable for small or middle Enterprise LANs, especially for data center switch-to-server interconnections.
Ideal for any device with an RJ45 port, including networking switches, IP Cam, routers, Nintendo switch,
Shipping weight0.08 kg
Package size152 × 127 × 25 mm

Questions about this item

Does the 3 ft cable arrive with both RJ45 ends fitted, or must I supply my own connectors?

Both RJ45 connectors are factory-fitted with 50 µm gold-plated contacts, so the cable is ready to plug in without any extra parts.

I see Cat 8 rated at 2000 MHz and 40 Gbps — which version should I pick for a 25 Gbps link?

This single 26 AWG S/FTP model already supports 25GBASE-T and 40GBASE-T, so no higher-capacity variant is needed for a 25 Gbps connection.

What does the 40 Gbps figure mean when I connect it to my router and PC?

It is the cable's maximum throughput at 2 GHz bandwidth; actual speed will match the lowest-rated port in the link, but the cable itself will not bottleneck 25GBASE-T or 40GBASE-T gear.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.