Nippon Labs
Nippon Labs 60CAT8-25-24GY Cat8 network ethernet cable 25 ft 24 AWG 2000 MHz 40 Gbps gray
Shielded Cat8 patch cable delivers 40 Gbps at 2000 MHz over 25 ft with 24 AWG conductors and gold-plated RJ45 connectors
- TypeNetwork Ethernet Cables
- Cat8
- Connector ARJ45
- Connector BRJ45
- Length25 ft.
- ColorGray
- 40 Gbps transfer rate at 2000 MHz frequency
- S/FTP shielding with foil and braid layers
- 24 AWG pure copper conductors for signal integrity
- 50 µm gold-plated RJ45 connectors resist corrosion
- 25 ft length suits indoor and outdoor runs
Cat8 cable for 40 Gbps links
This 25 ft Cat8 patch cable uses 24 AWG stranded copper conductors and dual S/FTP shielding to operate at 2000 MHz. It supports 25GBASE-T and 40GBASE-T applications in data centres, enterprise LANs and high-speed home networks. Gold-plated RJ45 connectors with 50 µm plating ensure reliable contact. The grey CM-rated PVC jacket is suitable for indoor and outdoor runs.
Shielded construction manages heat and signal loss
Foil around each pair and an overall steel braid minimise alien crosstalk and external interference without active cooling. The passive design draws no power and adds no audible noise to the installation. Stranded conductors keep the cable flexible for routing through tight paths while maintaining the specified frequency performance.
Snagless boots and strain relief simplify
Moulded strain relief and a soft flex push tab protect the latch from breakage during repeated connects and disconnects. The snagless profile prevents the tab from catching on adjacent cables or patch-panel edges. Backward compatibility with Cat5e, Cat6, Cat6a and Cat7 equipment lets the cable serve mixed-category environments without adapters.
Highlights
- 40 Gbps transfer rate at 2000 MHz frequency
- S/FTP shielding with foil and braid layers
- 24 AWG pure copper conductors for signal integrity
- 50 µm gold-plated RJ45 connectors resist corrosion
- 25 ft length suits indoor and outdoor runs
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 60CAT8-25-24GY |
| Type | Network Ethernet Cables |
| Cat | 8 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 25 ft. |
| Color | Gray |
| Shielded | Each pair Foil shielded / 4 Pair Braid Shield |
| Wire Gauge | 24 AWG |
| Features | Operates at a frequency of 2 GHz (2000 MHz), which enables higher bandwidth and requires shielding and is regarded as a new option for emerging 25gbase-t and 40gbase-t networks. Fully backward compatible with all the previous (cat5, cat5e, cat6, cat6a and cat7) RJ45 cabling and equipment. UL rated CAT 8 cable is designed to support 25gbase-t and 40gbase-t applications, It is suitable for small or middle Enterprise LANs, especially for data center switch-to-server interconnections. Perfect for servers, TV, TV Box, laptop, PC, printer, networking switch, routers, ADSL, adapters, hubs, |
| Shipping weight | 0.45 kg |
| Package size | 203 × 193 × 56 mm |
Questions about this item
How do I install the 25 ft Cat8 cable and what step do people get wrong?
Plug each RJ45 connector until the soft flex push tab clicks; the step people miss is seating the metal shielded connector fully so the 50µm gold contacts make solid contact.
What maintenance or replacement will this 24 AWG S/FTP cable need later?
Inspect the PVC CM rated jacket and overall steel braid for cuts after outdoor runs; replace if the foil shield or braid is damaged because shielding cannot be repaired.
What limit shows up first under sustained 40 Gbps use?
The 2000 MHz frequency rating sets the bandwidth ceiling; signal integrity degrades before the 24 AWG copper conductors overheat.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



