Nippon Labs 60CAT8-2-24YW-10P network ethernet cable 2 ft Cat 8 yellow 24 AWG shielded 2 GHz 2000 MHz 40G

link Cat 8 cable for dense racks

This two-foot Cat 8 patch cord uses 24 AWG shielded twisted-pair construction to deliver 40 Gbps throughput at 2000 MHz. Gold-plated RJ45 connectors on both ends ensure reliable contact in server-to-switch links, workstation uplinks or console-gaming drops where space is tight. The yellow jacket aids quick visual tracing in crowded panels. It suits installers who need a certified 25GBASE-T or 40GBASE-T link without excess slack.

Sustained 40 Gbps throughput with full shielding

The S/FTP design wraps each pair in foil and adds an overall braid, suppressing alien crosstalk during continuous 25GBASE-T or 40GBASE-T traffic. UL-rated Cat 8 materials maintain signal integrity across the full 2 GHz bandwidth, so latency and error rates stay low even under prolonged heavy loads such as storage replication or hypervisor heartbeat streams. Backward compatibility lets the same cord serve legacy Cat 5e through Cat 7 gear without re-termination.

Check port spacing and bend radius before ordering

Verify that the 2 ft length reaches between your specific switch and server ports without tension, as the shielded jacket is stiffer than unshielded alternatives. Confirm both ends accept standard RJ45 plugs; the cord will not fit proprietary keyed jacks or recessed ports that exceed normal clearance. Ensure your switch and NIC actually negotiate 25GBASE-T or 40GBASE-T, because slower ports will operate only at their own rated speed.