Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Nippon Labs
A 10 ft Cat8 patch cord with U/FTP shielding and 30 AWG stranded copper conductors, rated for 2000 MHz bandwidth and 40 Gbps data rates
This 10 ft Cat8 patch cord uses 30 AWG stranded pure copper conductors with U/FTP foil shielding on each pair. It is rated for 2000 MHz bandwidth and up to 40 Gbps data rates, making it suitable for emerging 25 GBASE-T and 40 GBASE-T copper deployments. The cable is fully backward compatible with Cat5e, Cat6, Cat6a and Cat7 equipment.
At 2 GHz the cable supports 40 Gbps over short copper runs typical of rack or desk-side connections. Performance falls off beyond the channel lengths defined for 25 GBASE-T and 40 GBASE-T, so longer horizontal cabling should use the appropriate category instead. The slim 30 AWG construction keeps the bend radius tight for dense patch panels.
Both ends terminate in RJ45 plugs with 50 µm gold-plated contacts and metal-shielded housings. A soft-flex push tab and moulded strain-relief boot prevent snagging and protect the latch during frequent moves. The CM-rated PVC jacket follows T568B wiring and the slim profile eases routing through cable managers and tight cabinet spaces.
| Brand | Nippon Labs |
|---|---|
| Model | 60CAT8-10-30WT |
| Type | Network Ethernet Cables |
| Cat | 8 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 10 ft. |
| Color | White |
| Wire Gauge | 30 AWG |
| Features | Operates at a frequency of 2 GHz (2000 MHz), which enables higher bandwidth and requires shielding and is regarded as a new option for emerging 25gbase-t and 40gbase-t networks. Fully backward compatible with all the previous (cat5, cat5e, cat6, cat6a and cat7) RJ45 cabling and equipment. UL rated CAT 8 cable is designed to support 25gbase-t and 40gbase-t applications, It is suitable for small or middle Enterprise LANs, especially for data center switch-to-server interconnections. Perfect for servers, TV, TV Box, laptop, PC, printer, networking switch, routers, ADSL, adapters, hubs, |
| Shipping weight | 0.22 kg |
| Package size | 229 × 178 × 51 mm |
Yes, the cable is fully backwards compatible with Cat5e, Cat6, Cat6A and Cat7 equipment, so it will plug straight into your existing RJ45 ports and negotiate the highest speed both ends support.
Check the connection status in your operating system or switch management interface; it should report a 40 Gbps link speed when both the network card and the switch port also support 25GBASE-T or 40GBASE-T.
The box contains the single 10 ft U/FTP slim patch cord with gold-plated RJ45 plugs on both ends; no additional couplers, keystones or installation tools are included.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?