Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Nippon Labs
A 10 ft Cat8 patch cord with S/FTP shielding, 24 AWG conductors and 2000 MHz bandwidth for 25GBASE-T and 40GBASE-T links
This 10 ft Cat8 patch cord is rated for 2 GHz operation and supports 25GBASE-T and 40GBASE-T applications. It targets data-centre switch-to-server links and high-performance LANs where 24 AWG shielded construction is required. The white jacket helps identify runs in dense racks.
Both ends use standard RJ45 connectors with gold-plated contacts, so installation is a direct plug into any RJ45 port. The S/FTP shielding adds bulk that can make tight bends harder to route and the connectors may not fit recessed ports on some consumer devices. Verify clearance before pulling the cable.
Confirm that your switch, server or router ports are rated for 25 Gbps or 40 Gbps to use the full bandwidth; the cable is backward compatible with slower categories but will not increase their speed. Ensure the RJ45 jacks have enough depth for the shielded plugs and that 10 ft reaches between your equipment without tension.
| Brand | Nippon Labs |
|---|---|
| Model | 60CAT8-10-24WT-10P |
| Type | Network Ethernet Cables |
| Cat | 8 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 10 ft. |
| Color | White |
| Shielded | Yes |
| Wire Gauge | 24 AWG |
| Features | Operates at a frequency of 2 GHz (2000 MHz), which enables higher bandwidth and requires shielding and is regarded as a new option for emerging 25gbase-t and 40gbase-t networks. Fully backward compatible with all the previous (cat5, cat5e, cat6, cat6a and cat7) RJ45 cabling and equipment. UL rated CAT 8 cable is designed to support 25gbase-t and 40gbase-t applications, It is suitable for small or middle Enterprise LANs, especially for data center switch-to-server interconnections. Perfect for servers, TV, TV Box, laptop, PC, printer, networking switch, routers, ADSL, adapters, hubs, |
| Shipping weight | 2.54 kg |
| Package size | 254 × 203 × 127 mm |
Connect the RJ45 plugs to 25GBASE-T or 40GBASE-T ports, then run a bandwidth test such as iperf3; sustained throughput near 40 Gbps confirms the 2 GHz link is operating as intended.
The pack contains ten 10 ft white Cat8 patch cords with gold-plated RJ45 connectors, S/FTP shielding and 24 AWG pure-copper conductors; you only need compatible RJ45 networking equipment.
This 10 ft 24 AWG Cat8 cable is rated for 25GBASE-T and 40GBASE-T, so it matches the highest speed listed in the specifications.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?