We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange 1 ft Cat8 slim Ethernet cable with RJ45 plugs

Nippon Labs

Nippon Labs 60CAT8-1-30OR network ethernet cable 1 ft Cat8 U/FTP 30AWG orange

SKU CH-DSNE-42DZQ MPN 60CAT8-1-30OR

A 1 ft Cat8 patch cord with foil-shielded 30 AWG pairs rated for 2000 MHz and 40 Gbps, backwards compatible to Cat5e

  • TypeNetwork Ethernet Cables
  • Cat8
  • Connector ARJ45
  • Connector BRJ45
  • Length1 ft.
  • ColorOrange
  • Supports 40 Gbps data rates for high-speed networking
  • 2000 MHz bandwidth handles demanding 25GBASE-T and 40GBASE-T applications
  • Each twisted pair foil-shielded (U/FTP) to reduce crosstalk and interference
  • 30 AWG slim profile eases routing in tight spaces
  • 50 µm gold-plated RJ45 contacts resist corrosion for reliable connections

Compact 1 ft Cat8 cable

This Nippon Labs 60CAT8-1-30OR cable is a Category 8 patch cord built for 40 Gbps transfer speeds and 2 GHz bandwidth. It uses 30 AWG stranded pure copper conductors with U/FTP foil shielding on each pair. The orange CM PVC jacket measures one foot end to end. It suits builders who need a short, high-frequency link between two RJ45 ports.

U/FTP shielding and slim profile

Each twisted pair is wrapped in aluminium foil, and the overall jacket carries no external braid, so the cable stays thin enough for tight routing inside dense racks or behind panels. Gold-plated 50 µm contacts on the RJ45 plugs resist oxidation, while a soft-flex push tab and moulded strain relief make repeated insertion easier. The T568B wiring ensures compatibility with existing Cat5e, Cat6 and Cat6a infrastructure.

Sustained 2 GHz operation

The 2000 MHz rating is specified for continuous bandwidth rather than brief bursts, so the foil shielding and oxygen-free copper core maintain signal integrity over extended transfers. Backwards compatibility means the cord negotiates down to lower categories without re-cabling. Buyers who need longer runs or higher power-over-Ethernet budgets should look elsewhere.

Highlights

  • Supports 40 Gbps data rates for high-speed networking
  • 2000 MHz bandwidth handles demanding 25GBASE-T and 40GBASE-T applications
  • Each twisted pair foil-shielded (U/FTP) to reduce crosstalk and interference
  • 30 AWG slim profile eases routing in tight spaces
  • 50 µm gold-plated RJ45 contacts resist corrosion for reliable connections

Specifications

BrandNippon Labs
Model60CAT8-1-30OR
TypeNetwork Ethernet Cables
Cat8
Connector ARJ45
Connector BRJ45
Length1 ft.
ColorOrange
Wire Gauge30 AWG
FeaturesOperates at a frequency of 2 GHz (2000 MHz), which enables higher bandwidth and requires shielding and is regarded as a new option for emerging 25gbase-t and 40gbase-t networks.
Fully backward compatible with all the previous (cat5, cat5e, cat6, cat6a and cat7) RJ45 cabling and equipment.
UL rated CAT 8 cable is designed to support 25gbase-t and 40gbase-t applications, It is suitable for small or middle Enterprise LANs, especially for data center switch-to-server interconnections.
Perfect for servers, TV, TV Box, laptop, PC, printer, networking switch, routers, ADSL, adapters, hubs,
Shipping weight0.06 kg
Package size152 × 127 × 25 mm

Questions about this item

What is the maximum data rate this Cat8 cable can sustain over its 1 ft length?

The cable is rated for up to 40 Gbps data transfer at 2 GHz bandwidth, using 30 AWG stranded pure copper conductors with U/FTP foil shielding.

How much heat or noise does the cable produce during continuous 40 Gbps operation?

As a passive copper cable it generates no noise and negligible heat; the CM PVC jacket and foil shielding handle signal integrity without active cooling.

Which devices must already have RJ45 ports wired to the T568B standard for this patch cord to work?

Any switch, router, server or NIC with standard RJ45 ports works; the cable is fully backward compatible with Cat5e, Cat6, Cat6A and Cat7 equipment.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.