We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 1 ft Cat8 U/FTP slim ethernet cable with RJ45 connectors

Nippon Labs

Nippon Labs 60CAT8-1-30BL 1 ft Cat8 U/FTP network ethernet cable Blue 30AWG

SKU CH-4J30-DXX9N MPN 60CAT8-1-30BL

A 1 ft Cat8 U/FTP patch cord with 30 AWG stranded copper conductors, 50 µm gold-plated RJ45 plugs and 2 GHz bandwidth for 40 Gbps networks

  • TypeNetwork Ethernet Cables
  • Cat8
  • Connector ARJ45
  • Connector BRJ45
  • Length1 ft.
  • ColorBlue
  • Supports 40 Gbps speeds for demanding 25G and 40G networks
  • 2 GHz bandwidth handles high-frequency data with reduced latency
  • Each twisted pair foil-shielded to minimise crosstalk and interference
  • 50 µm gold-plated RJ45 contacts resist corrosion for reliable connectivity
  • Slim 30 AWG stranded copper design enables flexible routing in tight spaces

1 ft Cat8 U/FTP patch cord for 40 Gbps links

This 1 ft Cat8 U/FTP cable uses 30 AWG stranded pure copper conductors and gold-plated RJ45 plugs to deliver up to 40 Gbps data rates. It is built for short runs between switches, servers or workstations that need 25 GbE or 40 GbE connectivity. The slim jacket keeps routing tidy in dense racks or behind desks. Backward compatibility covers existing Cat5e, Cat6, Cat6A and Cat7 equipment.

Sustained throughput at 2 GHz bandwidth

The foil shielding around each twisted pair maintains signal integrity at the full 2 GHz operating frequency, so the link holds its rated speed during long transfers rather than throttling after a short burst. Gold-plated contacts resist oxidation that would otherwise degrade performance over time. T568B wiring ensures consistent pin-out across the installation. The cable meets the electrical requirements for emerging 25GBASE-T and 40GBASE-T networks.

Low-profile build with snagless strain relief

A soft-flex push tab and moulded strain relief prevent the latch from catching on adjacent cables during moves or maintenance. The CM-rated PVC jacket is flexible enough for tight bends without kinking, while the overall diameter stays small for airflow in crowded cable trays. Shielded metal connector housings contain electromagnetic leakage in normal office or data-centre environments. Power draw is passive — no external supply is required.

Highlights

  • Supports 40 Gbps speeds for demanding 25G and 40G networks
  • 2 GHz bandwidth handles high-frequency data with reduced latency
  • Each twisted pair foil-shielded to minimise crosstalk and interference
  • 50 µm gold-plated RJ45 contacts resist corrosion for reliable connectivity
  • Slim 30 AWG stranded copper design enables flexible routing in tight spaces

Specifications

BrandNippon Labs
Model60CAT8-1-30BL
TypeNetwork Ethernet Cables
Cat8
Connector ARJ45
Connector BRJ45
Length1 ft.
ColorBlue
Shielded(U/FTP) Each Pair Foil Shielded
Wire Gauge30 AWG
FeaturesOperates at a frequency of 2 GHz (2000 MHz), which enables higher bandwidth and requires shielding and is regarded as a new option for emerging 25gbase-t and 40gbase-t networks.
Fully backward compatible with all the previous (cat5, cat5e, cat6, cat6a and cat7) RJ45 cabling and equipment.
UL rated CAT 8 cable is designed to support 25gbase-t and 40gbase-t applications, It is suitable for small or middle Enterprise LANs, especially for data center switch-to-server interconnections.
Perfect for servers, TV, TV Box, laptop, PC, printer, networking switch, routers, ADSL, adapters, hubs,
Shipping weight0.06 kg
Package size152 × 127 × 25 mm

Questions about this item

Does the 30 AWG stranded copper construction make the cable run hotter or draw more power during continuous 40 Gbps transfers?

The cable is entirely passive — no active electronics inside — so it generates no heat of its own and draws no power regardless of how long it runs at 40 Gbps.

What port type must my switch, router or NIC already have to use the RJ45 connectors on this cable?

Any standard RJ45 (8P8C) Ethernet port — the same jack found on Cat5e, Cat6, Cat6A and Cat7 gear — will accept the connectors directly.

Will this Cat8 patch cord negotiate down to 1 Gbps if I plug it into my older Cat5e wall jack and gigabit switch?

Yes. The cable is fully backward compatible with Cat5e, Cat6, Cat6A and Cat7 links, so it will automatically operate at the highest speed both ends support.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.