We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short gray Cat8 patch cable with slim jacket and RJ45 plugs

Nippon Labs

Nippon Labs 60CAT8-0.5-30GY 0.5 ft Cat8 U/FTP network ethernet cable gray

SKU CH-EKG4-080M3 MPN 60CAT8-0.5-30GY

A 0.5 ft Cat8 U/FTP patch cord with 30 AWG stranded copper conductors, 50 µm gold-plated RJ45 plugs and 2000 MHz bandwidth for 40 Gbps networks

  • TypeNetwork Ethernet Cables
  • Cat8
  • Connector ARJ45
  • Connector BRJ45
  • Length0.5 ft.
  • ColorGray
  • Supports up to 40 Gbps for 25GBASE-T and 40GBASE-T networks
  • 2 GHz bandwidth handles emerging high-speed copper standards
  • 30 AWG stranded pure copper conductors reduce resistance and signal loss
  • U/FTP foil shielding on each pair blocks external interference
  • 50 µm gold-plated RJ45 contacts resist corrosion for reliable connections

Run Cat8 Cable

This 0.5 ft Cat8 U/FTP patch cord connects two RJ45 ports in tight spaces such as patch panels, server racks or desk-side switches. The slim 30 AWG stranded copper construction makes it easy to route through crowded cable managers without blocking adjacent ports. It is built for installers who need a high-bandwidth link over a very short distance.

Sustained 40 Gbps Throughput

Each of the four twisted pairs is individually foil-shielded, supporting a 2000 MHz operating frequency that enables continuous 40 Gbps data rates rather than only brief bursts. The pure oxygen-free copper conductors keep resistance low so signal integrity holds across the full length during heavy, prolonged transfers. Backward compatibility with Cat5e, Cat6, Cat6a and Cat7 equipment means the same cable works in mixed-generation environments.

Low Heat, Quiet Operation

Passive copper construction draws no power and generates no audible noise, so it adds nothing to rack thermal load or ambient sound levels. Gold-plated 50 µm contacts resist oxidation, maintaining stable insertion loss over repeated mating cycles. The CM-rated PVC jacket and molded strain relief protect the conductors from bending stress in normal rack or desk use.

Highlights

  • Supports up to 40 Gbps for 25GBASE-T and 40GBASE-T networks
  • 2 GHz bandwidth handles emerging high-speed copper standards
  • 30 AWG stranded pure copper conductors reduce resistance and signal loss
  • U/FTP foil shielding on each pair blocks external interference
  • 50 µm gold-plated RJ45 contacts resist corrosion for reliable connections

Specifications

BrandNippon Labs
Model60CAT8-0.5-30GY
TypeNetwork Ethernet Cables
Cat8
Connector ARJ45
Connector BRJ45
Length0.5 ft.
ColorGray
Shielded(U/FTP) Each Pair Foil Shielded
Wire Gauge30 AWG
FeaturesOperates at a frequency of 2 GHz (2000 MHz), which enables higher bandwidth and requires shielding and is regarded as a new option for emerging 25gbase-t and 40gbase-t networks.
Fully backward compatible with all the previous (cat5, cat5e, cat6, cat6a and cat7) RJ45 cabling and equipment.
UL rated CAT 8 cable is designed to support 25gbase-t and 40gbase-t applications, It is suitable for small or middle Enterprise LANs, especially for data center switch-to-server interconnections.
Perfect for servers, TV, TV Box, laptop, PC, printer, networking switch, routers, ADSL, adapters, hubs,
Shipping weight0.05 kg
Package size152 × 127 × 25 mm

Questions about this item

Does the 2 GHz frequency rating mean the 0.5 ft cable runs hot during continuous use?

No, the Cat8 cable is a passive copper assembly with no active components, so it generates no measurable heat while carrying data at up to 40 Gbps.

What port type must my existing equipment provide for the RJ45 plugs on this cable to seat correctly?

Any standard RJ45 jack — the connectors are wired to T568B and fit Cat5e, Cat6, Cat6A and Cat7 ports as well as Cat8.

Will the 30 AWG stranded conductors and pair-level foil shielding work reliably when I link a Cat6A switch to a Cat7 router?

Yes, the U/FTP shielding and pure copper pairs are fully backward compatible, so the cable will negotiate the highest speed both devices support.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.