Innovation First, Inc.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
$72.99
0.00083964BTC
In stock
Nippon Labs
Nippon Labs 60CAT7-5GY Cat7 network ethernet cable 5 ft Gray
Shielded Cat7 patch cable with gold-plated RJ45 connectors, rated for 600 MHz and 5 ft length
- TypeNetwork Ethernet Cables
- Cat7
- Connector ARJ45
- Connector BRJ45
- Length5 ft.
- ColorGray
- Supports 600 MHz bandwidth for high-speed Gigabit Ethernet
- Double-shielded SSTP construction reduces crosstalk and system noise
- 50-micron gold-plated RJ45 contacts resist corrosion for reliable connectivity
- Molded strain-relief boots protect connectors from damage during use
- UL and ETL verified compliant with TIA/EIA standards
What this cable is
This is a Category 7 shielded patch cable with RJ45 connectors on both ends. It uses 26AWG stranded pure copper conductors, double shielding and 50 micron gold plated contacts to support 600 MHz transmission frequency over a 5 ft gray CM type PVC jacket.
Check before ordering
Verify that your router, switch or network card has standard RJ45 ports and that a 5 ft run reaches between the two devices. The cable follows T568B wiring and is UL and ETL certified for TIA/EIA compliance, so it works with any Gigabit Ethernet equipment using the same connector.
Who this suits and who it does not
Suits installers needing a short, fully shielded Cat7 link for Gigabit Ethernet in environments with electromagnetic interference. Not for buyers who need longer runs beyond 5 ft, outdoor or plenum rated jackets, or a different connector type such as keystone or angled plugs.
Highlights
- Supports 600 MHz bandwidth for high-speed Gigabit Ethernet
- Double-shielded SSTP construction reduces crosstalk and system noise
- 50-micron gold-plated RJ45 contacts resist corrosion for reliable connectivity
- Molded strain-relief boots protect connectors from damage during use
- UL and ETL verified compliant with TIA/EIA standards
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 60CAT7-5GY |
| Type | Network Ethernet Cables |
| Cat | 7 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 5 ft. |
| Color | Gray |
| Shielded | Yes |
| Features | 26AWG double shielded 4pair stranded pure copper wire RJ45 shielded plug with 50 micron gold plated contacts 600MHz rated CM Type PVC jacket Certification: Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant T-568B standard wiring Cat.7 patch cable specifications require transmission frequencies of up to 600 MHz over 100 meters (328Ft) of fully shielded copper cabling Cat.7 cable consists of four individually shielded pairs inside an overall braided shield, also known as Shielded Twisted Pair Cable (SSTP), or S/FTP (Shielded Foil Twisted Pair) Cat.7 features even more strin |
| Shipping weight | 0.11 kg |
| Package size | 178 × 165 × 25 mm |
Questions about this item
What comes in the box and do I need anything else to use the 5 ft Cat7 cable?
The box contains the 5 ft Cat7 patch cable with RJ45 connectors on both ends. No extra parts are required; plug it into any RJ45 port on a PC, router, switch or server.
How do I choose between the available lengths or colours for this Nippon Labs model?
This listing is for the 5 ft gray version only. If you need a different length or colour, look for another SKU in the same Cat7 shielded range.
What does the 600 MHz rating mean when the cable is installed in a real network?
The 600 MHz bandwidth supports the full Cat7 specification, allowing 10 Gigabit Ethernet speeds over the 5 ft run with reduced crosstalk thanks to the double-shielded SSTP construction.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Vertiv
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket
$70.99
0.00081663BTC
In stock
