We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat7 ethernet cable with shielded RJ45 connectors, 5 ft length

Nippon Labs

Nippon Labs 60CAT7-5BK Cat7 network ethernet cable 5 ft

SKU CH-D4T6-Y4DJ8 MPN 60CAT7-5BK

Shielded Cat7 patch cable rated for 600 MHz with gold-plated RJ45 connectors and 26 AWG pure copper conductors

  • TypeNetwork Ethernet Cables
  • Cat7
  • Connector ARJ45
  • Connector BRJ45
  • Length5 ft.
  • ColorBlack
  • Supports 600 MHz bandwidth for high-speed data transfer
  • Double-shielded 26 AWG pure copper pairs reduce crosstalk and noise
  • 50 micron gold-plated contacts resist corrosion for reliable connectivity
  • CM-rated PVC jacket meets fire-safety standards for in-wall use
  • T568B wiring ensures compatibility with standard Gigabit Ethernet equipment

What this cable is and who needs it

This Nippon Labs Cat7 patch cable provides a five-foot shielded link with RJ45 connectors on both ends. It is built for installers and network builders who need a short, fully shielded run between a switch, router or wall jack and a desktop, server or NAS. The 26 AWG stranded copper construction keeps the cable flexible for tight rack or desk routing.

Behaviour under sustained load

The double-shielded SSTP design wraps each of the four twisted pairs in foil and adds an overall braid, suppressing alien crosstalk and external noise during continuous high-throughput transfers. Gold-plated contacts rated at 50 micron resist oxidation so insertion loss stays stable over long periods. The CM-rated PVC jacket meets in-wall fire requirements for permanent installations.

What it replaces and when the upgrade matters

This cable replaces unshielded or lower-category patch leads where electromagnetic interference degrades link stability or where certification demands TIA/EIA compliance verified by UL and ETL. The 600 MHz bandwidth headroom supports Gigabit Ethernet with margin for future multi-gig upgrades on runs up to 100 meters. Buyers who need longer reach or non-booted connectors should select a different length or style.

Highlights

  • Supports 600 MHz bandwidth for high-speed data transfer
  • Double-shielded 26 AWG pure copper pairs reduce crosstalk and noise
  • 50 micron gold-plated contacts resist corrosion for reliable connectivity
  • CM-rated PVC jacket meets fire-safety standards for in-wall use
  • T568B wiring ensures compatibility with standard Gigabit Ethernet equipment

Specifications

BrandNippon Labs
Model60CAT7-5BK
TypeNetwork Ethernet Cables
Cat7
Connector ARJ45
Connector BRJ45
Length5 ft.
ColorBlack
ShieldedYes
Wire Gauge26 AWG
FeaturesCat.7 patch cable specifications require transmission frequencies of up to 600 MHz over 100 meters (328Ft) of fully shielded copper cabling.
Cat.7 cable consists of four individually shielded pairs inside an overall braided shield, also known as Shielded Twisted Pair Cable (SSTP), or S/FTP (Shielded Foil Twisted Pair).
Cat.7 features even more stringent specifications for crosstalk and system noise than Cat.6, and is designed specifically for Gigabit Ethernet applications.
Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant.
4-pair stranded pure copper wire 26AWG double shi
Shipping weight0.11 kg
Package size178 × 178 × 25 mm

Questions about this item

Does the 26 AWG stranded copper construction affect heat or signal loss when the cable runs continuously at 600 MHz?

The 26 AWG stranded pure copper conductors with double shielding are rated for 600 MHz transmission over 100 metres, so continuous operation at that frequency stays within specification without excess heat or signal degradation.

What equipment must already have RJ45 ports wired to the T568B standard for this patch cable to work?

Any switch, router, network card or wall jack with standard RJ45 sockets using T568B wiring will connect directly; the cable’s shielded RJ45 plugs with 50 micron gold contacts mate with those ports.

Will the SSTP shielding and 600 MHz rating cause compatibility issues with older Cat5e or Cat6 hardware kept in the same run?

The cable is fully backward compatible; its shielded RJ45 plugs and T568B wiring interoperate with legacy Cat5e and Cat6 equipment while providing the higher 600 MHz bandwidth where supported.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.