Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Nippon Labs
Shielded Cat7 patch cable rated for 600 MHz with gold-plated RJ45 connectors and double-shielded 26 AWG copper conductors
This four-foot Cat7 cable uses individually shielded twisted pairs inside an overall braided shield (SSTP). It is rated for 600 MHz bandwidth and wired to the T-568B standard with RJ45 plugs on both ends. The 26 AWG stranded pure copper conductors have 50 micron gold-plated contacts and a CM-grade PVC jacket. It is UL and ETL verified to TIA/EIA specifications and RoHS compliant.
Builders who need a short, fully shielded link between a switch, router or wall jack and a desktop, server or NAS will appreciate the double shielding and gold contacts. The four-foot length keeps slack to a minimum in rack or desk setups. Installers who require longer horizontal runs, outdoor burial ratings or plenum-rated jackets should look at something else.
At this length the cable comfortably handles Gigabit Ethernet and 10 Gigabit Ethernet up to the 100 metre specification limit. The 600 MHz rating provides margin for alien crosstalk in dense bundles. Performance beyond the rated frequency or over distances exceeding 100 metres is not supported by the Cat7 specification.
| Brand | Nippon Labs |
|---|---|
| Model | 60CAT7-4BK |
| Type | Network Ethernet Cables |
| Cat | 7 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 4 ft. |
| Color | Black |
| Shielded | Yes |
| Wire Gauge | 26 AWG |
| Features | Cat.7 patch cable specifications require transmission frequencies of up to 600 MHz over 100 meters (328Ft) of fully shielded copper cabling. Cat.7 cable consists of four individually shielded pairs inside an overall braided shield, also known as Shielded Twisted Pair Cable (SSTP), or S/FTP (Shielded Foil Twisted Pair). Cat.7 features even more stringent specifications for crosstalk and system noise than Cat.6, and is designed specifically for Gigabit Ethernet applications. Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant. 4-pair stranded pure copper wire 26AWG double shi |
| Shipping weight | 0.10 kg |
| Package size | 152 × 127 × 25 mm |
Any network device with an RJ45 jack — router, switch, PC, NAS, or PoE equipment — will accept the shielded RJ45 plugs on this 4 ft patch cable.
Yes, the T568B wiring and RJ45 connectors are backward compatible, so the cable will link at the highest speed both ends support.
Run a qualified cable certifier or a network tester that reports frequency sweep results up to 600 MHz; a pass confirms the double-shielded 26 AWG pairs meet Cat7 specs.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?